How to unjailbreak your iphone or ipad

@craigelloyd
Aug 16, 2016, 3:00 pm EST | 2 min read

If you’re having seconds thoughts about jailbreaking your iOS device, here’s how to easily unjailbreak it and go back to normalcy.

To unjailbreak, many how-to guides say that you need to put your iOS device in recovery or DFU mode, but that’s actually not the case at all. In fact, it’s a lot easier than that–you just need to erase your device, then restore it from a backup. The backup won’t include the jailbreak or jailbroken apps, so you’ll be back to stock iOS.

To start, you’ll first want to plug your device into your computer and fire up iTunes. Then click on the device icon in the upper-left corner to open up the device summary screen.

Make sure iTunes has all the movies and music you want on your device, since we’ll be erasing it shortly. Once you’ve done so, it’s time to back up your device’s apps and settings.

To back up your device, click on “Back Up Now”.

After that process is finished, open up the Settings app on your device, and navigate to iCloud > Find My iPhone. From there, disable Find My iPhone. You’ll only do this temporarily, as Apple requires this feature to be disabled when restoring your device.

Next, go back to iTunes and click on “Restore iPhone”.

You may receive a pop-up window asking if you want to back up your stuff, but since you already did this, just click on “Don’t Back Up”.

Click “Restore” when the next pop-up window appears.

The process will begin and will take around five minutes or so.

Eventually, you’ll see the below screen in iTunes when the process is complete. You can either select “Set up as new iPhone if you want to start from scratch, or select “Restore from this backup” to get back all of your apps, settings, contacts, etc.

Restoring a backup to an iOS device takes a few minutes, and when iTunes says that it’s done restoring the backup and your iPhone or iPad completely reboots, you can unlock it. From there, you’ll see the iOS Setup Assistant start screen. Swipe to the right to continue and go through the steps to set up your iPhone again. You’ll set up things like Location Services, Touch ID, Apple Pay, and iCloud.

Once you complete the setup process and reach the home screen, you’ll notice that you might have some apps that are darkened out with “Waiting…” underneath these app icons. This means that these apps are downloading to your device and are being installed, so sit back and relax while this happens, as it can take a while.

Once that’s done, though, your iPhone or iPad will be completely ready to use again and you’ll be free of the jailbreak.

It is now possible to unjailbreak your iPhone, iPod Touch or iPad, without having to restore or update its firmware. All thanks to the newly released Cydia Impactor tool from Saurik.

If for some reason, you want to unjailbreak your iOS device, but would like to retain the ability to re-jailbreak, simply use Cydia Impactor.

The tool is currently in beta and works only on iOS 8.3 and iOS 8.4. If you’re jailbroken on an older firmware, then you must simply update to iOS 8.4 and jailbreak using TaiG.

Using Cydia Impactor to unjailbreak your iOS device is very easy. However, the unjailbreak process will erase all data on your iPhone, iPod Touch or iPad, so make sure you’ve backed up your device.

Also, it is important that your device is connected to WiFi and has more than 50 percent of charge.

Here’s how to unjailbreak your iPhone, iPod Touch or iPad using Cydia Impactor:

• Download and install Cydia Impactor from Cydia.
• Launch Cydia Impactor and tap on the delete all data and unjailbreak device button.
• Wait for the process to finish, it’s going to take a while.
• Once completed, your iOS device will reboot and you have to go through the activation/setup process again.
• Good news is, you’re still on the firmware that you were on before unjailbreaking.

That’s pretty much it. No more restoring or updating firmware and losing the ability to jailbreak.

What do you think of this unjailbreak tool?

Comments

Tried cydia impactor with iphone 6+, ios 8.3. Work well, no problem occured. After that perform OTA to 8.4, smooth too. And jailbreak with taig 2.4.3 beta, no stuck, required restart at 20% ,and 99%? Not so sure with the last one cz im sleepy. But after all. No problem. Best tool ever.

big thing, it is working like a charm! really great and USEFUL

Does this work for new osi 9.2?

ayuda amigos como puedo liberar mi iphone 5 para itra compania y utilizarotr sim card

If you need to undo your jailbreak, follow these simple steps to restore your iDevice to its original (jailed) state.

Jailbreaking isn’t for everyone. Cydia is quick to overwhelm even the tech-savvy user, and upgrading iOS software on a jailbroken device can be a headache-inducing process.

Whether you’ve discovered that jailbreaking isn’t for you, or you need to take your iDevice to the Genius Bar for repair, you’ll need to unjailbreak your device.

There are plenty of forums, blog posts, and YouTube videos that attempt to guide you through this process. Many are outdated, and, in some cases, incorrect.

So, to find the proper way to unjailbreak an iDevice, I went to the source. Nikias Bassen, a developer for the Chronic-Dev team, the folks behind the Absinthe jailbreak and greenpois0n.com, offered this simple solution:

1. Back up your iDevice. Sync it with iTunes or iCloud to make sure you have a back up of your phone’s current state. Whether you’re using iTunes or iCloud, make sure you tweak the sync settings so that everything you need is backed up. With iCloud, you can force a backup by going to Settings > iCloud > Storage and Backup > Back Up Now.
2. Restore. When the backup is complete and your device is connected to iTunes, select it from the sidebar. Then, in the Summary tab, click “Restore.” Now iTunes will restore your iPhone, iPad, or iPod to factory settings and completely wipe the device.
3. Recover your backup. Now your device will display guide you through activation. Once you pass the Wi-Fi setup screen, you’ll be asked how you’d like to set up your device. If you did an iCloud backup, select that option. Otherwise, go to iTunes and restore it from the backup you created in the first step.

In a few minutes, your device will restart, and your apps, settings, and other data (like contacts) will be restored. Cydia is gone, and when you take your iDevice to the Genius Bar, there will be no obvious traces that you once broke your gadget out of jail.

home_icon Created with Sketch.

Home > Erase iPhone > How to Unjailbreak iPhone, iPad or iPod Touch

May 17, 2018 (Updated: August 12, 2020）

12434 views , 2 min read

If you’ve decided to unjailbreak your jailbroken iPhone in order to restore your iPhone, iPad or iPod touch to its original operating system (iOS), then you can achieve this by either using the backup/restore feature in iTunes or using Cydia Impactor. However, the need to totally erase your iPhone will come up after unjailbreaking your iPhone. What do you do to totally wipe out all your data and information to make your iPhone become new?

Therefore, we shall be introducing you to the two ways to unjailbreak iPhone, and the best way to permanently wipe out iOS data from a newly unjailbreaked iPhone.

• Part 1: How to Unjailbreak An iPhone
• Part 2: How to Completely Erase An Unjailbroken iPhone
• Part 3: What You Need to Do before Unjailbreaking iPhone

How to Unjailbreak An iPhone

The following methods will work perfectly in unjailbreaking your jailbroken iPhone.

#1. Using Cydia Impactor to Unjailbreak iPhone

With little effort, you can unjailbreak iPhone using Cydia Impactor. However, this tool works for iOS 8 iPhone, iPad, and iPod touch. Be sure to safely backup your iOS device as this method will erase all your contents, settings, and apps.

Step 1: Make a backup of your iOS device contents and settings using iTunes or iCloud.
Step 2: Make sure that you have at least 20% of battery life on your iPhone, iPad, or iPod touch.
Step 3: Download and install Cydia Impactor from Cydia.
Step 4: Run Cydia Impactor by clicking “Delete all data and unjailbreak device”. Then click “Delete All” tab to confirm your action. The process will be shortly after this when it’s complete, you’ll see your iOS setup screen.

Step 5: Go through the iOS install and activation process.

#2. Use iTunes Restore Feature

Another method to unjailbreak iPhone is by iTunes Restore feature. However, this process requires you to back up your iPhone, iPad or iPod touch before unjailbreaking it.

Here are the steps to follow:

Step 1: Launch iTunes on your computer.
Step 2: In the Summary tab, Click “Restore iPhone”.
Step 3: Then click “Restore and Update”. The restore process may take several minutes to complete, you should not unplug your iPhone during the restore process.

Step 4: Your iPhone will restart with the latest iOS after these steps, and all of your data and settings, including jailbreak features will be erased.

How to Completely Erase An Unjailbroken iPhone

If you have the intention to give away or sell your iPhone 6 after unjailbreaking it, then you also have the necessary to totally wipe out your iOS data beyond recovery. However, restoring your iPhone with iTunes doesn’t completely wipe out private data to render it unrecoverable to anyone. Hence, you need a tool that has the potent features to overwrite your iOS data before selling it.

iMyFone Umate Pro for Win or for Mac is the one and only iOS data erasure tool that can perform this function for you. You can also use its special function to scan and erase private data to safeguard your privacy and information. It is the right tool for erasing your unjailbroken iPhone.

• Permanently erase all your iOS data, files, information and apps. This tool will not only erase them but will render them 100% unrecoverable.
• Scan for deleted iOS files and data to permanently erase them.
• Choose the private files to erase instead of wiping out all the files at once.
• Erasing fragments generated in the process of running your iOS apps.
• Erase junk files on the iOS device for free.

The Steps to Erase an Unjailbroken iPhone:

Step 1: Launch iMyFone Umate Pro, you can see 1 clean mode and 4 erase modes, choose the second one: “Erase All Data”.

Step 2: Click “Erase”, and then type ‘delete’ to comfirm the operation.

Step 3: There are 3 security levels, you can change them if you want. Then click “Erase Now” to start the process.

Note: The process may cost much time, when it was finished, all of your data would have gone and couldn’t be recovered.

What You Need to Do before Unjailbreaking iPhone

Before unjailbreaking iPhone, you should ensure that the following requirements are met:

1. Backup your iPhone: It’s advisable that you first backup your iPhone data to your PC as the process of unjailbreaking your iPhone would erase your entire iPhone data, and would restore your iPhone to factory settings.
2. Plug and charge your iPhone battery: Make sure that you have at least 20% of battery life on your iPhone, or charge your iPhone to 20% battery life before unjailbreaking it.

“Jailbreak” is a familiar word for some of iPhone, iPad, and iPod Touch users. If your device is jailbroken, you will have freedom in installing the applications which are not permitted in App Store. But you may change your mind, and want to unjailbreak your iPhone, iPad, and iPod Touch for some reason, such as:

• You want to turn back the iOS performance.
• There are some bugs caused by certain tweak or application that you’ve installed from Cydia.
• You are planning to sell your device.

There is a new way to do that. Creator of Cydia app and service, Jay Freeman (nickname: Saurik) has released Cydia Impactor, a tweak that lets you unjailbreak iPhone, iPad and iPod Touch without restore. Before this, the users who wanted to unjailbreak their devices had to restore their iPhone, iPad or iPod and that was the only way.

How to Unjailbreak iPhone, iPad and iPod Touch Without Restore

Before you do this:

• Cydia Imfactor supports iOS 8.3 and 8.4
• Cydia Impactor will not work with iPod Touch 6th gen.
• Cydia Impactor will erase all your data. Do a backup data first through Mac/PC or iCloud.
• After you are done with unjailbreaking, you will have to activate your device. For the unlocked iPhone, you need to use a SIM card for the activation process.
• If you have activated Find My iPhone, you need to sign in again by using Apple ID that you used previously in the iCloud setting.
• In the process, the device has to be connected to the internet.
• Your device needs to be connected to a charger.
• Never interrupt while the unjailbreak process is running.

Steps

• Go to Cydia application on the home screen.
• Tap Search and type: Cydia Impactor
• You will find it and tap Install

Source: iclarified.com

• After that, there will be a new application on your home screen named Impactor
• Tap Impactor on home screen
• At the first screen, you will be reminded about the preparation you need to do
• Tap delete all data and unjailbreak device

Source: iclarified.com

• A pop-up message “Confirmation” will appear, tap Delete all

Source: iclarified.com

• Do an initial setup your iOS device.

You can restore your device back by using a jailbreak tool.

How to unjailbreak iPhone : Cydia is a very useful tool. It allows the users of Apple devices to have complete control over the functionality of their devices, even allowing to change the deepest of the settings! Yes, but as you know, everything has its down sides. Jailbreaking over the time will degrade the performance of your Apple device. Not that all devices show signs of slowdowns, however a majority of them do.

There may be other reasons supporting your decision of un-jailbreaking your device too. Maybe you are willing to sell your phone, you want to upgrade to the latest software version by Apple, or you just simply want to start the Jailbreaking thing from a fresh piece of software. Whatever may be the case, this article on how to unjailbreak iPhone will be surely helpful to you.

In the further paragraphs, you will come across two methods of un-jailbreaking your Apple device, first by official iTunes and second, by using a Cydia eraser tool. Both of them are completely safe, however ensure the compatibility of either before proceeding with how to unjailbreak iPhone guides.
The following how to unjailbreak iPhone and other iDevice guides are full-fledged. If you are on a newer software version, do cross-check with the exploit publisher to avoid any bricked devices.

How to Unjailbreak iPhone Using iTunes

ITunes, as most of us will be aware of, is the official computer package suite for the Apple devices. The same is used to sync all the data, update you iPhone and even restore your iPhone to a mint condition. The process by which we will be going to un-jailbreak using iTunes will update your iPhone to the latest iOS version out for your device, so do keep that in mind unless you want to go to a specific software version.

This method on how to unjailbreak iPhone works for those who have earlier took a backup of their Apple device on the computer using iTunes.

• Connect your Apple device to the computer using lightning cable supplied.
• Ensure that your phone has a minimum of 20% battery power left, or leave it to charge until it gets so.
• If you don’t have iTunes installed, you can download the same by going to the Apple’s official website. ITunes is completely free to download.
• Launch iTunes on your PC and let the phone sync with the software. If you are connecting your phone for first time, then a prompt may show up on your iPhone. Grant the permission for so.
• From the left side menu, pick the device you are willing to restore.
• Choose the restore option and then find the ‘Backup’ option.
• From there, choose the backup you want to restore and then proceed with the restoration process.
• The process will take around 20 minutes or maybe more, depending on the size of the data.
• After your phone has been restored, unplug it and restart once.

If you see any errors during the process, then try unplugging, reinserting and following this how to unjailbreak iPhone process again.

How to Unjailbreak iPhone Using Cydia Eraser

This how to unjailbreak iphone method does not require a computer or any such secondary device to proceed with the un-jailbreak process. However, it requires Cydia to be active on your device. An added advantage of this method is that it will not update your iPhone to the latest software version.

• Launch the Cydia repository on your iPhone.
• Search for Cydia Eraser app and install the same.
• After the download process has finished, launch the Cydia Eraser app from the home screen.
• Carefully go through the mentioned details to avoid any errors thereafter.
• After you are done with reading, choose ‘Erase all data, unjailbreak iPhone device’.
• A prompt will pop up on the device asking for confirmation.
• Tap on the ‘Erase all’ option to proceed.
• A new window will popup showing the progress of unjailbreak iOS process.
• The process will take around 5-15 minutes.
• After the process has finished, the device will restart and you will see a loading bar. This is the indication that the process is successful and the device is being reset so that you can activate it.

Follow the welcome process and once that is complete, go to settings and general tab to confirm that you are on the same software version.

Conclusion

Now that the how to unjailbreak iPhone process is completed, you can proceed with doing whatever you want. As an additional step, you can also consider updating your iPhone to the latest firmware version if you are willing to run stock software (i.e. not jailbreaking the device again).

So I hope this is the answer for your query ”How to jailbreak iPhone”. Follow any one method and unjailbreak your device to normal stock software. We will get back to you soon with a new interesting topic.

You can join us on Facebook or Twitter for keeping yourself updated with latest news and tweaks from iPhone and iPad jailbreak community.

Jailbreaking your iOS device is a powerful concept as it gives you the root access to the iOS file system. Enabling you to install third-party apps, tweaks, or modify your iPhone, iPad or iPod touch to get an exclusive smartphone experience – you can have it all, almost. There are a number of downsides to jailbreaking too. No warranty, which means you cannot get your device repaired at an Apple store if you have somehow managed to damage your iOS device. If for this, or any other reason, you are looking to unjailbreak your iOS device, thankfully, it is quite an easy process.

This guide will hopefully help you to unjailbreak your iPhone, iPad, or iPod touch and get you that warranty back from Apple.

Here are the few steps to unjailbreak iPhone, iPad, or your iPad touch

• Create a back up of your iOS device; or you could also restore to the backup that you may have created earlier.
• Enter into Recovery mode: turn off your iPhone or iPad and wait for it to completely shut down. Plug USB cord to the computer slot and hold down the Home button while connecting the USB cord’s other end to your iPhone. Keep holding the Home key until you see the recovery mode image.
• iTunes will then detect your iPhone in the recovery mode. Here, press OK.
• Once successfully in the recovery mode, you simply need to click on the Restore iPhone. button in the iTunes. No downloads or any other thing needed, simply restore.
• Next, click on Restore and Update and then Next to verify to unjailbreak your iPhone, iPad, or iPod.
• Agree to terms shown and it should start installing the latest iOS iteration on your device.
• It would take a few minutes, so please be patient.
• Once the restore process is completed successfully, activate your iPhone in the iTunes by entering your Apple ID and Password.
• You can here restore from a backup done earlier or simply start using the device fresh.
• That’s just about it!

In case you think about upgrading to iOS 8 bet, here is the guide to help you do so: iOS 8 beta 1 Direct Download Links for iPhone, iPad, and iPod Touch. In case you are interested in jailbreaking again, here are Steps to Jailbreak iOS 7.1 and iOS 7.1.X with Pangu.

Chinese software team Pangu already released a couple of jailbreaking methods for the latest iOS 11. That means that now users can jailbreak even the most recent iPhone 8/8 Plus and iPhone X, as well as all the older iDevices running iOS 11.

If you are reading our articles, you know that we DO NOT recommend jailbreaking your iPhones and other iDevices. Yes, jailbreaking your iPhone will bring you some additional functionalities and features for you. But, besides the advantages, jailbreaking is a procedure that will void your iDevice’s warranty and has many downsides like performance and security issues. However, many users still decide to jailbreak their devices, and later, they want to get back to the original stock iOS state. But is that unjailbreak process even possible?

Yes, it is possible, and it is even simpler than the jailbreaking process. If you own a jailbroken iPhone 8, iPad, or any other iOS device, and you want to unjailbreak it (reverse it to the original iOS condition), here you can find all that you need. In the rest of the article, I will explain the steps you need to take, to remove the jailbreak from your iDevices.

Backup Your iDevice

Before we start with the first step, let me tell you that unjailbreaking is a process in which you may lose your personal data. So, make sure you perform a full backup of your iPhone or iPad. The best practice is to save your backup file on 2 locations (locally and on the cloud). Here is how can you do an iCloud backup on the latest iOS 11.

1. Connect your iPhone, iPad, or iPod touch to a Wi–Fi
2. Go to Settings, tap on Your Name and choose iCloud.
   
3. Tap on iCloudBackup and make sure the toggle is ON.
4. Now, click on Back Up Now and stayconnected to the Wi-Fi network until the process finishes.
   

If you want to check the progress and confirm if the backup is complete, go to Settings, tap on Your Name, tap on iCloud, and open iCloud Backup. Under the button Back Up Now you can see the time and date of the last backup.

The Unjailbreaking Process

After your device is done with the backup process, you can start with the following steps for unjailbreaking it.

1. Connect your iPhone or iPad to your PC or Mac using the original USB cable.
2. Launch iTunes on your computer.
3. Unlock your iDevice and TurnoffFindMyiPhone.
   • Go to Settings, tap on YourName and choose iCloud.
   • Tap on Find My iPhone and make sure the toggle is OFF. You will need to enter your AppleID and password, to turn this feature off.
     

1. In iTunes on your computer, select your iDevice when it appears.
2. In the Summarypanel, click on the Restorebutton. You’ve just started the unjailbreakingprocess.
3. During the procedure, your device will restart. It will ask you if you would like to restorefrom a backup Here you can select the iCloud option if you want to restore it from the file that you created earlier.

When the process finishes, your iOS device is back to its factory settings. You will see the usual set-up steps that you had done when you turned on your iDevice for the first time.

Conclusion

The unjailbreaking process that I explained above works the same on every iPhone, iPad, or iPod touch, from the oldest models to the newest ones. It also works on all iOS versions, including the latest iOS 11.

If you ever want to reverse the jailbreak, make sure to check this article. And, do not forget to protect from potential risks with performing a backup on your iDevice before beginning.

Want to remove your jailbreak without updating iOS? The just released Cydia Impactor can help you unjailbreak your iPhone with little effort. In this video tutorial, I’ll show you how to revert back to stock iOS and remove your jailbreak without updating your iOS version.

Note: This tool is in beta for iOS 8.3 and iOS 8.4, so your mileage may vary. Be sure to backup your device, as this will delete all settings, apps, and contents. It will remove all jailbreak related stuff and “unjailbreak” your iPhone. You will still remain on the same firmware, but all of your data will be wiped. Proceed with caution.

Also, I should mention that Cydia Impactor will not work with the 6th generation iPod touch, since there are no OTAs for that device.

Step 1: Backup your iOS device using iCloud or iTunes

Step 2: Make sure that you device is plugged in, and has at least 20% battery life

Step 3: Install Cydia Impactor from Cydia

Step 4: Run Cydia Impactor by tapping delete all data and unjailbreak device, then tap the Delete All button to confirm. Once the process begins, be sure not to touch your device until you see the iOS setup welcome screen

Step 5: Once completed and at the welcome screen, go back through the initial iOS setup process and activation

That’s it. You will now have a stock iPhone on your current firmware. If you want to reestablish your jailbreak, just use the same jailbreak tool that you used to jailbreak before. You can also choose to restore your backup during the iOS setup process.

What do you think? Are you excited to have this new firmware preservation tool?