How to reverse tether an android smartphone or tablet to your pc

“As an Amazon Associate & Affiliate Partners of several other brands we earn from qualifying purchases.” [Read More Here]

Most of us rely on broadband connections instead of mobile data for surfing the internet due to the fact that broadband or data cards come with a cheaper plan and offer relatively high speed. Using your computer’s internet connection on a smartphone might be feasible in some cases but it’s a big headache to use if the broadband ain’t based on wireless fidelity.

For solving the same, we are here with a tutorial on How to reverse tether your Android device. The process of using Mobile’s internet on PC is called Tethering, and this is entirely reverse of it, and therefore it is called Reverse Tethering.

There are basically only a few methods available for doing this, out of which some are mentioned below.

1. Sharing a LAN connection over Wi-Fi [Windows 10] [New]

You can share a wired LAN connection with any of your WiFi-enabled devices including your Android phone. This method is very simple, takes very little time and doesn’t require any sort of high-level technical skills.

The latest version of Windows 10 has made it quite easier to create a hotspot and share the internet connection with other devices’ WiFi. The steps are pretty easy and you can get it rolling within a few minutes.

• Go to Windows Settings >> Network & Internet >> Mobile hotspot.

• Select the Internet Connection that you want to share.
• Click Edit to set WiFi Network Name (SSID) and Password.
• If you are using a Bluetooth Device to remotely enable the Mobile hotspot then turn on the last option.
• After you are done with the settings you can turn on the Mobile hotspot and get your internet connection rolling on other WiFi-enabled devices.

2. Sharing a LAN connection over Wi-Fi [Connectify]

If you are not using the latest version of Windows then you need the Connectify Hotspot software on the host device, the pro version of the Connectify Hotspot to be more specific. Using the software and following the steps given below, you can create your own customizable hotspot network with which you can share your internet connection with friends and family over WiFi, that too without the need for a WiFi router.

1. Download the latest version of the Connectify Hotspot Pro on your computer.
2. Make sure that your PC/ Laptop has native WiFi support or else use a WiFi dongle. A Data card will work too in case you want to share its internet instead of wired LAN.
3. Run the Connectify Hotspot app and select your LAN network adapter as the ‘Internet to Share’. You can also select other sorts of Wi-Fi, 4G networks, and VPN virtual adapters if in case you want to share your internet connection with them.
4. Next, give your hotspot network a Name (SSID) followed by a strong enough password.
5. Furthermore, you can make use of the Adblocker to save your data bandwidth and to prevent annoying pop-ups here and there.
6. Now simply press the “Start Hotspot” button to create your own personal network using your PC’s LAN or Data card connection.

You can now connect your Wi-Fi enabled devices such as PCs, laptops, tablets, smartphones, and game consoles to your PC’s internet connection. You can also use this software to boost your WiFi range or as a WiFi bridge to save money at certain places while traveling.

3. via Android Reverse Tethering Package

Now if you are not able to use the methods mentioned above then this one is the most complex one. It will require a rooted Android phone and a little bit of Android knowledge.

1. Download Universal Naked Drivers and Android Reverse Tethering Package.
2. Enable USB Debugging on your device.(Go to Settings -> Developers Option -> Tick USB Debugging Option)(In case you do not find Developer options on your device, then go to Settings -> About -> Tap on build number for about 7 times, following which a toast notification will indicate that you are now a developer and can tweak with the developer options.)
3. Next, as mentioned, open the SuperSU application from App Drawer.
4. Go to SuperSU Settings, tap on Access and then Uncheck show Notifications.
5. Further, you need to extract the Android Reverse Tethering Package on your PC as linked above. Also, make sure that you already have the Universal Naked Drivers installed on your PC.
6. Copy all the three APK’s in it to your Phone’s SD card. or Internal Storage.
7. Install all three applications.
8. Now, open the Xposed Installer application and click on the Install/Update button. You will be asked to reboot your phone.
9. After Rebooting. Go to Xposed Installer, navigate through Modules and Check Hack Connectivity Service. (Complete this step if your phone has > Android 4.x.x otherwise, don’t). Then reboot your phone.
10. After rebooting. Open USB Tunnel from App Drawer. Click on start service.
11. In your Computer, Navigate to the location where you have extracted the Reverse Tethering Package.
12. Connect your phone to your PC. (Make sure that USB Debugging is on and you have granted the permissions by clicking on Allow on the pop-up)
13. Click on Android Tool.exe.
14. Select your device and click on Connect. You have completed the setup process by now!
15. Open up the Android browser and you are good to go.

So these were the few methods that you can use easily to share the internet connection from your computer to your other WiFi-enabled devices. If you have any other method then do let us know via the comment section below.

Tethering is used by several people and it is a beneficial way to share the Internet connection of your smartphone or tablet with that of a PC. Generally, a smartphone is tethered with a PC or laptop to share the connection of the phone to surf using the latter. At times, you might want to use the connection on your computer or laptop to help in browsing using your Android device. In such cases, reverse tethering of the Android device is possible and there are several ways to do the same. Here are some possible ways discussed to do reverse tethering.

Reverse Tether App

The Reverse Tether application requires you to simply connect your phone to your computer via a USB cable. It is easy to carry out the process using the application and the steps are elaborated in the application. The drivers of your smartphone that are installed on your computer are enough to make the application work. After getting the process done, you can simply plug your smartphone to your computer using a USB cable and you can enjoy the internet connection on the former. It is easy to setup this process, but your device has to be rooted for Reverse Tether to work.

Connectify 3

You can reverse tether your Android device using wireless connection and the process is easy to setup as well. It is more beneficial as it is not done using the USB cable and hence, you will have the mobility as your Android smartphone will not be attached to your computer using a cable. You will need an internet connection on your laptop or computer with Wi-Fi enabled.

Recommended: 5 Apps to Edit, Trim Video on Android

The Connectify 3 has to be installed in your laptop and you will have to write the desired connection name in the SSID. Setup the password you want for the connection and it select the network that you want to share. Also, select the encryption method after the entire process. Switch on the Wi-Fi on your smartphone and connect to the network you have setup.

Android Reverse Tethering

To reverse tether using Android Reverse Tethering, you will have to turn on USB Debugging on your device by going to Settings -> Applications -> Development -> USB Debugging -> Turn On. Then, connect your Android smartphone to your PC. The next step is to open the downloaded Android Reverse Tethering tool, extract it and open the same. Now, open the AndroidTool.exe in the Android Reverse Tethering folder and select your device. You will have to choose a DNS to be used and check the DNS. Install the Hack Connectivity called fake Wi-Fi. Install the same and restart your mobile. Restart your device and activate the service by clicking on the Connect button to start with Android reverse tethering.

Conclusion

These steps will help in enjoying the internet connection on your laptop or computer to browse on your Android smartphone with the help of Android reverse tethering options.

If you’re planning to go out on a vacation to a place where a Wi-Fi connection seems impossible, tethering will be your key to keep your other devices hooked up to the online world. Tethering is the ability to share your mobile phone’s cellular data connection with other devices. This neat feature, however useful, requires additional data connection and relatively increases your phone’s monthly bill.

If your mobile phone can’t share its Internet connectivity, why not reverse the process instead? Developers from XDA Developers have come up with a solution to share the broadband connection of your PC to your mobile phone. Although it’s currently running as beta with a few bugs, the software can be used to browse the Internet on your mobile phone.

This guide will only work if you have rooted your device and with a Windows PC. We will not be liable for any damages arising from your use of this guide. Use the presented information at your own risk.

Remember that the tool is still beta software, so expect a lot of kinks and bugs. You can surf using Google Chrome, Firefox, Opera, or Dolphin Browser, although Google Chrome complains of not having an Internet connection even though it works. Ping and low-level ICMP packets don’t seem to work either. Searching on the Android Market works, but at the moment, it is not yet possible to download and install apps from the Android Market.

Requirements

• A rooted Android phone
• Desktop or laptop computer running Windows
• Working broadband Internet connection on the desktop or laptop
• Android Software Development Kit (SDK) installed on the desktop or laptop (optional but recommended)

Instructions

1. Download the reverse tethering tools (ReverseTethering 2.30.zip, 3.34 MB) and save the file to your computer. The ZIP file contains AndroidTool.exe (Android USB Tunnel tool for your Windows machine), ADB, and the Android APK (Android USB Tunnel tool for your Android phone).
2. Extract the ZIP file to a folder on your computer.
3. Enable USB debugging on your phone by going to Settings > Applications > Development > USB Debugging.
4. Go to the folder where you extracted the ZIP file’s contents.
5. Run AndroidTool.exe.
6. Connect your phone to your PC using a USB cable.
7. In the Android USB Tunnel window, click on the Refresh Devices button.
8. From the list on the right of the detected devices, select a Domain Name Server (DNS) to use.
9. Click the Show Android Interface button. This will install the app and other needed binaries to your phone.
10. If the Superuser app on your phone asks whether to allow “USB Tunnel,” choose to allow the app. If the process crashes after receiving Superuser rights, close the Android USB Tunnel Windows application and repeat the procedure from the start.
11. Click on the Connect button on the Android USB Tunnel window on your computer.
12. Again, if the Superuser app on your phone asks, choose to allow “USB Tunnel.”

Congratulations! You have successfully reverse-tethered your Android phone to your PC.

Have you come across a situation when your desktop computer has an internet connection that you want to share with your phone? If yes, here is a solution for you. The process is called Reverse Tethering and it lets you use your PC’s internet on an Android phone.

It’s a simple and quick process, that doesn’t require root privileges. And you don’t have to spend a dime.

So, the app we are using here is called Gnirehtet, which I know sounds absurd but is just “Tethering” spelled reversely. It works on Google’s cross-platform ADB (Android Debug Bridge) software. For those of you unfamiliar, this is a software interface between your smartphone and the PC. And it is compatible with Windows, Mac, and Linux.

Now without much ado, let’s get down to the process itself.

Steps to share PC Internet with Android Phone

• As a prerequisite, download the ADB tool and gnirehtet compressed files from Android Developers and GitHub websites respectively.
• Next up, unzip both compressed files onto your PC in separate files (one for ADB and the other will be of gnirehtet).

Enable USB Debugging within Developer Settings

” data-medium-file=” data-large-file=” src=” alt=”Gnirehtet Reverse Tethering” width=”225″ height=”243″ data-recalc-dims=”1″ /> Enable USB Debugging within Developer Settings

• Enable USB debugging on your Android device from the Developer settings. You can access this hidden settings menu by tapping 7 times on Build number within the About Phone section.

• Connect your phone to a PC with a USB cable. You’ll get an ADB connection prompt on the phone. Be attentive to this and enable it.

This guide is intended to help you share Internet connection from your PC to your Android smartphone/tablet via USB cable. This technique is called USB reverse tethering.

Step 1: Download the “GNIREHTET” (rev (TunnelServer.java:26) at com.genymobile.relay.Relay.start(Relay.java:44) at com.genymobile.relay.Main.main(Main.java:30)

Step 7: CONNECT YOUR ANDROID PHONE VIA USB

Go to settings – developer Options.

Make sure that USB Debugging is ON.

Step 8: Back to the CMD: Install the APK File.

c:\adb\adb.exe install -r gnirehtet.apk

**assuming that the adb.exe is located on C: as your %systemdrive%

290 KB/s (19110 bytes in 0.064s) pkg: /data/local/tmp/gnirehtet.apk Success!

Step 9: Create a Reverse TCP

c:\adb\adb.exe reverse tcp:31316 tcp:31416

Step 10: LAST THING TO DO: TYPE:

gnirehtet start [yourandroidserialnumber]

ex. gnirehtet start UTNESAGQ99HAEWBE

TO GET YOUR ANDROID SERIAL NUMBER:

SETTINGS > ABOUT PHONE> STATUS > SERIAL NUMBER

Starting gnirehtet. Starting service: Intent

on your Phone, a prompt will come out, notifying you that the apk we install will create a tunnel..

Step 11: FROM YOUR PHONE:

YOU will see a key icon indication that a VPN tunnel has been created.

Step 12: ..

This Tut has been Done Using a Windows 10 Pro x64 machine.

The client registers itself as a VPN, in order to intercept the whole device network traffic, as byte[] of raw IPv4 packets, which it transmits to the relay server over a TCP connection (established over adb). The relay server parses the packets headers, open connections from the computer to the requested destinations, and relays the content in both directions following the UDP and TCP protocols. It creates and sends response packets back to the Android client, which writes them to the VPN interface. In a sense, the relay server behaves like a NAT, in that it opens connections on behalf of private peers. However, it differs from standard NATs in the way it communicates with the clients (the private peers), by using a very specific (though simple) protocol over a TCP connection.

References

• Spiceworks General Support |
• Philippines |
• Spiceworks Desktop App Support |
• General IT Security |
• General Networking

3 Total Comments

uh that’s neat, but why?

There are other ways.

Well, for users who dont have the money to pay for mobile data, and don’t have wifi access in the area.

This might come handly for some.. maybe not for you 🙂

Here, we will do reverse tethering without any software.

USB Internet is a built-in option which is available in specific model devices (I have Micromax mobile and it has this option).

If your device has this option, then you can use this option to reverse tether. This method works on both rooted and non-rooted devices.

Connect Android to the laptop via USB cable.
Go to Settings in your Android phone.
Under Wireless & networks, you can find the option of “USB Internet”. Tap it (you can only able to enable this option if you’ve connected devices via USB).
Choose your operating system.
Click Next. Click on “Done” button.

You can see that the devices are connected and you can see a new adapter (Local Area Connection 2) on your computer. To see new adapter, go to “Run command”(Shortcut: Windows key + R), type ncpa.cpl and press enter.

However, we can’t get an internet connection? Why? Because we’ve not enabled the internet connection sharing yet. Let’s check it out the steps to do that.

Click on “Properties” of internet connection that you want to share (Open Run, type ncpa.cpl, right click on the internet connection and choose Properties).
Navigate to Sharing tab.
Click on the first option and choose the new adapter (Local Area Connection 2) from the drop-down list. Click on “OK” button.

That’s it. Now, you can see that the PC internet is shared with your Android via USB internet option. c

Want to share PC’s Internet with mobile but don’t know how to do ? Have a PC with LAN Connection that does not have WiFi Enbaled but you want to share internet with your Mobile using USB Cable ?

If answer to above question is yes then be with us in this article, till end you will be able to share Internet with your phone via PC with few simple steps.

Things you need before getting started

• An Internet Enabled PC with USB Slot.
• A Working USB Cable.
• An Android Smartphone.

Have above things ready, Lets get started

1) Firstly enable USB Debugging in your Android Device.

Enabling USB is very easy just goto settings and open developer options then click on enable USB debugging. If you any difficulty in finding Developer Option please let us know in comments we will help you. See the image below for reference.

2) Now download zip file in your PC from link below

Make sure you download the zip file in PC because we are going to use these files in PC only.

3) Connect your Android Mobile with your PC using USB Cable.

Make sure USB Cable is connected properly because it is important otherwise tool will not be able to find your device in PC.

4) Now Extract the zip file and open command prompt (CMD) from extracted folder.

After extracting make sure you open command prompt in extracted file directory only otherwise command will not work.

5) Type below command and hit enter.

Instead of typing you can simply copy and paste in CMD and hit enter. The process can take some time so be patient.

6) After successful completion of above command type and hit below command.

This command will hit action to your phone.

7) Now in your android phone a popup will be displayed just click OK.

This popup just make sure you want enable internet connection in your phone via PC so don’t worry just click OK.

8) That’s All!! – Just open web browser and search something.

Bonus – Watch the video below on USB Reverse Tethering for easy understanding.

Final Thoughts

Hope this article helped you in solving your problems, If you liked the post please share with your friends from button below. If you have any query or need help please feel free to ask in comments.

Tech Purush

Tech Purush is a passionate blogger, content writer and android developer. He loves to evaluate and share new things with lovely people like you.

Chris Hoffman is Editor-in-Chief of How-To Geek. He’s written about technology for over a decade and was a PCWorld columnist for two years. Chris has written for The New York Times and Reader’s Digest, been interviewed as a technology expert on TV stations like Miami’s NBC 6, and had his work covered by news outlets like the BBC. Since 2011, Chris has written over 2,000 articles that have been read nearly one billion times—and that’s just here at How-To Geek. Read more.

Standard “tethering” involves connecting your phone, tablet, or other device to your smartphone, sharing your smartphone’s mobile data connection with your other devices. But you may sometimes want to get your iPhone or iPad online via your PC or Mac.

This is most useful when you’re in an area with low signal strength — perhaps if you don’t have a Wi-Fi signal and only have an Ethernet connection available to you. Or, you may be unable to connect your iPhone or iPad to the local Wi-Fi network.

Reverse-Tether Over Wi-Fi

Wi-Fi tethering might be the best idea, just as creating a Wi-Fi hotspot on your phone is a good way to share its mobile data connection. If you’re unable to get your iPhone or iPad online because there’s no Wi-Fi signal near you and you have to connect your laptop or PC to an old-fashioned wired Ethernet connection, this can work well.

On a Windows PC, you can use the Internet Connection Sharing feature and create a Wi-Fi hotspot. Connect your iOS device to the hotspot provided by your laptop (or desktop, if it has Wi-Fi hardware) and you can then get online through the wired Ethernet connection.

With a Windows PC, you can also share a Wi-Fi network you’re connected to over Wi-Fi. You’ll just need to use the Virtual Router software to turn your Windows laptop into a Wi-Fi hotspot.

On a Mac, you can use the Sharing panel in the System Preferences window to enable Internet sharing over Wi-Fi, sharing a wired Ethernet connection connected to your Mac via a Wi-Fi hotspot.

Unlike on a Windows PC, your Mac can’t share a Wi-Fi connection it’s connected to by creating a Wi-Fi hotspot. It can only do one thing at a time with one physical Wi-Fi adapter. However, you can do this by purchasing additional USB-to-Wi-Fi devices, giving your Mac multiple Wi-Fi interfaces.

Reverse-Tether Over Bluetooth

On a Windows PC, you shouldn’t need to bother creating a Bluetooth personal area network (PAN) at all. You’ll probably be better off just creating a Wi-Fi hotspot and connecting to it from your iPhone or iPad.

On a Mac, creating a Bluetooth PAN is a useful way to share a Wi-Fi Internet connection your Mac is connected to. This is useful when you can’t get your iPhone or iPad online via Wi-Fi — perhaps you only have a single login to the network and you can only have one device online at a time. This often happens on hotel Wi-Fi networks.

To do this, open the Sharing panel in the System Preferences window, tell your Mac you want to share its Wi-Fi connection, and select Bluetooth. Pair your iPhone or iPad with the computer via Bluetooth and it’ll gain access to the Internet through the Bluetooth connection.

USB Reverse-Tethering — Only for Jailbreakers

You can tether your Mac or Windows laptop to your iPhone or iPad via a USB cable, gaining access to the Internet through the phone or tablet via the USB cable.

So, can you reverse-tether an iPhone or iPad to a Mac or Windows PC over USB, gaining access to the computer’s internet connection from your phone or tablet? It sounds logical, but you can’t normally do this.

Like all sorts of things you can’t normally do on an iPhone or iPad, you can likely do this if you jailbreak the device and go out of your way to hack around.

But we don’t recommend trying this. Instead of reverse-tethering over a USB cable, just create a Wi-Fi hotspot or a Bluetooth PAN to share your Mac or Windows PC’s Internet connection with your iPhone or iPad. It’ll work without any jailbreaking or hacks required. Sure, a wired connection might technically be faster, but the wireless one should be good enough.

These same methods can be used to share an Internet connection from other operating systems, too. For example, Linux PCs also offer the ability to create Wi-Fi hotspots, and you can connect your iPhone or iPad to that hotspot over Wi-Fi.

Share your mobile data connection/Internet with other phones, laptops, and PC or Mac computers

Using your Android smartphone as a hotspot enables sharing mobile data, and an Internet connection is convenient from time to time. Using an Android smartphone as a hotspot can enable your Laptop, PC, or tablet device to access the Internet. There are various ways of tethering and sharing mobile data with a PC via Bluetooth, Wi-Fi with a mobile hotspot app, or using a USB cable.

Does android tethering cost money?

Some mobile carriers and service plans include tethering and hotspot services, some will charge extra, and some don’t allow you to use your paid data for tethering purposes. Therefore, it’s worth finding this out before you begin, as it may mean you need to pay a little more each month for tethering or upgrade your plan to included tethering. One more thing to point out is that while virtually all smartphones are cable of tethering and therefore sharing data connection, this is not always the case as some carrier-branded devices are sold with the hotspot capabilities disabled.

What are the common ways to share mobile data with a PC

Bluetooth Tethering

Bluetooth tethering allows you to share the internet connection with other phones or tablets. However, connecting via Bluetooth can be a slightly more complicated process and is slower than simply connecting via Wi-Fi. However, Bluetooth tethering consumes significantly less battery power compared to Wi-Fi hotspot. Bluetooth Tethering is not recommended for regular. But in the rare case, you can go to Settings > WiFi & Internet > Tethering and enable it on most android smartphones.

WiFi HotSpot Tethering

Alternatively, most people will automatically think of using the smartphone as a personal Wi-Fi network, with the phone acting as an Internet connection hub. Other devices connect through it in the same way as they would a normal wifi network, simply by selecting a device from the available Wi-Fi networks list and entering a password. This enables users to simultaneously connect multiple devices and provides higher Wi-Fi speeds than the Bluetooth method.

Using Wi-Fi Tethering or HotSpot is very simple and quick on android. Go to Settings, tap the more option under Wireless & Networks, and tap Tethering & portable hotspot. Toggle the on switch and add a unique password to make your connection secure.

USB Tethering

USB tethering needs the smartphone is connected to a PC (either laptop or desktop) using a USB cable, which then provides an Internet connection to the PC. This wired method can be a useful alternative as it can provide faster speeds and means the phone can receive power from the PC. The drawback is only one device can be tethered via USB at the same time.

You can enable USB tethering on android from Wireless & Networks > Tethering & portable hotspot under the Settings menu on most android phones. Just make sure the USB connection between your device is up and running properly.

Using an android tethering app to share internet

Third-Party Tethering Apps basically the default WiFi HotSpot Tethering with added extra features. We’ve rounded up some of the best tethering apps that make the process effortless with other features.

PdaNet+

PdaNet+ is the most reliable tether app that includes both PdaNet and FoxFi to connect Windows PC or Mac computers or other devices to your mobile network without rooting your phone or needing an extra tethering plan for your carrier. This well-known app tethers over Bluetooth, USB, and WiFI. It offers the maximum speeds and multiple connections simultaneously.

This app is free to download but occasionally force stop in the free version. It works seamlessly with other android devices via WiFi direct. To get PdaNet working with computers, you need the client app on your PC or Mac.

Tetrd — USB Tethering & Reverse Tethering (NoRoot)

Tetrd is a recent tether app on google play store that allows USB Tethering and works as Reverse Tethering so you can share your wired internet connection from computer to android smartphones. It also works on Non Rooted devices. This is very useful in some situations. On the minus side, you can try the app for three days and upgrade if you need it for an extended period. But the free version is handy for the occasional need.

Don’t you just hate it when your phone’s Internet connection is cut off? A lack of Internet connection really screws things up, especially if you are downloading something very important. You don’t have to worry anymore because there is now a way for you to enjoy the Internet on your phone by using your computer’s Internet connection. How, you ask? There’s an app called Reverse Tether that will do the trick for you. Read on to know more about Reverse Tether.

You might like: What is Tethering?

Apart from calling and text messaging functions, your Android device is quite useless without the Internet. With out an Internet connection, you cannot download apps, movies, music or even use most of your apps. That won’t be a problem anymore because there’s a new way to access your computer’s Internet connection. Reverse Tether is an app developed by lightlan and is especially useful if you have a limited mobile data plan or none at all. Use Reverse Tether to enjoy your computer’s fast Internet connection without paying for any extra charges on your monthly bill. You can also choose to show your connection as 3G.

How It Works

To use Reverse Tether, simply connect your phone to your computer using a USB cable. Using the app is very easy because the the app will guide you on how to set things up on your computer. There is no need for accompanying software; all you need is your phone’s drivers installed on your computer for Reverse Tether to work. On the other hand, if you know your way around your computer, there is also an option for manual configuration.

After you have set Reverse Tether up, you can connect to the Internet instantly and easily. Every time you want to access the Internet, simply plug your phone into your computer via the USB cable and you’re set.

Although setting up the app is quite easy, there are a few things that you need before you can install it. First and foremost, you need to have your device rooted for Reverse Tether to work. You also need to have a tether option on your device and you computer should have an option to edit the network connections, which most computers do.

Downside

Reverse Tether also has some downsides. One great limitation of Reverse Tether is that it is not guaranteed to work on all devices. Based on the reviews, the app worked on some devices such as the Samsung Galaxy S2, Samsung Galaxy 5, and Sony Xperia Arc. Factors like carrier restrictions or the configuration of your phone will determine whether Reverse Tether will work on your phone. Also, the app is not free and although there is a trial version, it only allows you to connect for a certain length of time.

Some users, however, were able to use Reverse Tether on their phone and connected to the Internet with ease. Try Reverse Tether now and have a back up plan in case you lose phone’s Internet connection. You can download Reverse Tether from the Google Play Store.

The ability to tether out our smartphone (or tablet’s) cellular connection is of massive convenience, and can sometimes be a great life-saver when the primary source ceases to operate.

If you experience a power-cut, for example, the chances are, use of your Wi-Fi hub is cut with it, leaving you with no option but to use your smartphone – provided, of course, you keep it topped up with ample amounts of juice.

There aren’t many apps, however, which work the other way round, allowing your device to use your computer’s connection. Why not just hook up to the same Wi-Fi as the computer? I hear you cry. Well, in some circumstances, this isn’t always a possibility. For example, not all connections – as hard as it may be to believe for some – are Wi-Fi, and some do still connect via DSL modems instead.

Although most do have their own Wi-Fi hotspots, these are often weak, and if you have a limited plan on your device as well, your chances of browsing the web on your Android device are very limited indeed. In such instances, Reverse Tether for Android could be just the solution. So long as you’ve your USB recharge / sync cable in hand, you can take advantage of your computer’s fast, secure internet connection without incurring any extra charges.

Once you’re online, you can continue to play games, browse the web, sync mail, or download updates without any hassle at all, and although Reverse Tether does cost five dollars, there’s a free trial version allowing you to preview the product before parting with any money.

Of course, in order to establish the connection, your Android device must be rooted. Additionally, it will only work on devices with a tether option, and your desktop will naturally need to have an internet connection. There’s no additional software requirement on the part of your desktop/laptop, and all you’ll need to do is edit Network Connections (explained in more detail in-app).

Download Reverse Tether for Android [Google Play link]

Secondly, there’s a tougher around it which you can check out here, though we’d recommend you go with the Reverse Tether app, since it offers a free trial and it’s hassle free.

Download it, give it a whirl, and let us know how it runs for you by dropping a comment via the usual mediums below.

Be sure to check out our Android Apps gallery to explore more apps for your Android device.

You can follow us on Twitter, add us to your circle on Google+ or like our Facebook page to keep yourself updated on all the latest from Microsoft, Google, Apple and the Web.

USB reverse tethering = Cellphone gets network connection from PC via USB.

I know how to do USB reverse tethering except for one problem: Many Android apps will check network connection using the code below before doing any useful work:

The problem is that, when using USB reverse tethering, the above code will report no network connection. However, there IS a network connection (which is the USB reverse tethering itself), and ping, wget and all programs not doing this stupid check work well.

So the question is: How can I hack the system to let this network connection check return success (so that I can fool these apps)?

BTW. I use Cyanogenmod 7. And any solution specific to this MOD is also welcome.

2 Answers 2

If you are doing this much hacking I am assuming that you will probably have your device rooted. If so program a shell interface to send commands to the device shell with JNI and receive STDOUT. Use this interface to run a netcfg command that can be parsed into an array – this will give you all the details the API hides. It also allows you to override Androids device settings using the ipconfig command.

As far as using this to send and receive from your device – in my experience – you will have to probably compile a device specif module that can be loaded into the kernel at run time. Or just download the kernel from the manufacturer and compile the module into the kernel and then flash the phone with the new custom kernel.

Hope this helps.

To do this , you have to download ReverseTethering_3.19.zip file (Google it to find the link.) Extract to your desired location.

Prerequisite: –

1. only rooted phones work.
2. USB debugging should be enabled.

Now connect your rooted android mobile to PC through USB cable.Wait for PC to recognize your mobile. Now open the extracted zip file and open AndroidTool.exe with admin rights.

Now click connect in the android tool.

Now it tries to connect and installs USB tunneling apk on your device.It also asks for super user rights . Grant it.

Finally after successfully establishing the connection, you will see. (Sorry, I cant upload image.)

Now you get the internet on your mobile and usb tunneling app is installed.But you can access only HTTP connections(i.e;) works only in chrome. Play store apps may not work.

So you have to fool apps and make it believe that either is mobile is connected to WiFi or mobile data . Only then apps work.

Now install hack(optional).It installs Xposed framework and installs hack connectivity apk. Just follow the instructions , it is easy. Hack connectivity makes the apps believe that mobile is connected to WiFi or mobile data depending on which type of hack u did after installing Hack connectivity. Finally after hacking ,it asks for reboot. After reboot , you can enjoy internet using USB reverse tethering on all apps.

Is there a way for the phone to access the Internet through the USB connection to the computer? If so, how do I set it up?

7 Answers 7

I recently discovered SimpleRT which works very well with Linux (and apparently OSX as well). Simply enable USB Debugging on your device (no root required), install the APK linked from that page on your device and connect it to your PC via USB, and then run the binary on your PC.

It will set up the connection as a VPN tunnel ( tun0 by default) and your device should prompt you to (a) allow SimpleRT to create/oversee the VPN connection as well as (b) whether to run it when the device is configured as a particular USB accessory (which is what the binary does).

The project does not include a pre-built binary, so I’ve uploaded one I built for Ubuntu.

For Windows: Install USB drivers from Android SDK

For Linux: Nothing to do

STEP 2:

On Nexus One: Connect USB cable and activate USB Tethering. You should see on linux or windows a new network interface.

STEP 3:

On Linux Computer, setup a bridge:

On windows, Bridge the 2 network interfaces

STEP 4:

Setup usb0 interface of your phone. You have to options:

From your computer, execute:

Or in a root terminal on your phone, type:

You should now be able to connect to Internet on your phone using your computer’s Internet connection.

Try to do a ping to be sure !

STEP 5:

To shut down the reverse-tethering, first unbridge interfaces on your computer:

Then on your phone, uncheck the USB Tethering option !

There are some more possibilities — but all of them I know of require a rooted device.

First, there’s an App named Reverse Tether available for free on the Play Store (it’s a limited trial, which restricts the time you can be connected — but at least you can test this way whether your device is fully supported; the full version is about USD 5). According to an article at AndroidAuthority, setup should be as easy as 1-2-3: Plug in the USB cable, start the app, let it auto-configure (manual configuration is available as well) — and there you go. You can also let it ask you to connect when it finds an USB-connection.

I know, this is not USB — but for completeness (and giving alternatives) I thought I might add these as well:

fiddling with the system and patching around

Several manual methods are available as well (and described e.g. at XDA) — but they are mostly technically complex, and expecting you to patch system files; not for the every-day-user, but rather for the tech-freak.

Terminal and go

However, another nice method should just involve 3 lines in the terminal, and is described in a post here, to connect to an ad-hoc Wifi network. Basically, it should go like this:

manipulating some config file

Another quite easy method is also described here, and involves editing the wpa_supplicant.conf file once (manually adding your ad-hoc Wifi network).

Do I need to say, really? Use a Wifi router. There are even some small “Travel routers” around for less than USD 50. And then connect your phone like you use to connect it to other Wifi networks.

I know this is an even later answer, but it is worth mentioning it.

No rooting needed!

No app installation needed!* Which is not even possible if you do not have some other internet connection.

There is a project called gnirehtet.

1. Install adb on to the host PC (Windows/Linux/Mac)
2. Download the gnirehtet zip-file to the host
3. Unzip it
4. Run the command

That’s it! For more information, read the readme file of gnirehtet on their website.

*=Behind the scenes it will install an apk file on to your device via the USB connection.

Hey! there is an app for that

I am a bit confused how to use it, please inform if you get it working perfectly.

I’ve found a good tool for reverse tethering on xda-developers forum. It’s called Android Reverse Tethering. It works with Windows and requires a rooted phone.
It works fine on my HTC Desire HD running MIUI v4.

Android reverse tethering steps:

Note: Works only in a rooted Android phone.

Connect Android device via USB.

Enable USB tethering. To do so, go to Settings → More. → Tethering & mobile hotspot → Usb tethering.

At host machine, the usb tethering connection may be detected by the network manager.
Its name will be something like “Wired connection 2” (or 3).
You must edit it’s “IPV4/Method” to “Shared to other computers”.

3.1. Without the network manager, you will have to do it manually:

Now, as explained here at the end of Step1 you have to modify iptables with sudo iptables -t nat -A POSTROUTING -j MASQUERADE . But. prefer allow network manager to do it if possible.

At Android device, you can issue these commands using a terminal with su there, or from your host machine by using ADB:

If it doesn’t get the IP address, or if you are using some application that a static IP address is desirable like “Webkey for Android” App, then assign it manually:

Now internet would be working in the Android phone.

Connecting the two lets you send answer text messages, see notifications, and instantly grab photos from your Android on your Windows 11 PC. We walk you through the simple process of getting started.

You take a picture on your phone, and now you want to see it on a bigger screen. You get a text message, but you don’t want to dig out your phone to reply to it while you’re working on your PC. Windows 11 lets you see that photo and reply to that message right from your keyboard. All you have to do is connect your Android device to Windows 11. Most impressive of all, with some Android phone models you can simultaneously use multiple mobile apps right on your computer.

For years, Apple has topped Windows in terms of mobile-desktop integrations with macOS’s ability to let users text and make calls from their desktop. Apple Silicon-based Macs go even further, with mobile-app-running capability. Windows users can finally claim at least parity with mobile-to-desktop functionality described here.

If you have an iPhone, you can also connect it to a computer running Windows 11, but you won’t get the same depth of experience that Android users do. Microsoft has stated that it wants to bring the same functionality for iPhones to Windows, but Apple has long been uninterested in releasing users from lock-in with its products. That said, you can connect an iPhone to a Windows PC for some basic file transfer functions. We’ll cover that setup process in another article. Here, we focus on showing you how to connect an Android phone and a Windows 11 PC.

What You Need to Get Started

Windows 11 actually prompts you to connect your smartphone during its initial setup process. Assuming you didn’t do so at the time, we’ll take you through the procedure and call out a few things you should know before you start.

One important requirement is that you need to install an app on your phone called Your Phone Companion and you need to sign into the app with the same Microsoft account that you’re signed into on your PC.

Another requirement is the phone has to be in Wi-Fi range of the PC because while the apps are running on the phone, display and control occur on the PC.

Additionally, to get any Android-to-Windows 11 functionality at all, you need to be running Android 7 or later. Any Windows 11 PC works. To test the setup, we used a Surface Laptop 3 and a Samsung Galaxy S21 Ultra. The phone model is more important than the PC model in terms of what functions you get.

When you connect an Android device to a Windows 11 PC, you have two options: Your Phone Companion, which most Android phones support, and Link to Windows, which currently only works with select Samsung models and Surface Duo phones (Opens in a new window) . Comparing the two options, Link to Windows offers far more functionality, like mirroring Android apps on the PC (note this is different from the much-touted ability of Windows 11 to run Android apps, in which the apps actually run on the PC hardware).

Step-by-Step: How to Connect Your Android and Your PC

Open Settings. Go to the Bluetooth & devices section and scroll down to Your Phone. Click it, and right away you see an advantage for Android phones. An option slider offers “Show me suggestions for using my Android phone with Windows.”

Install the Your Phone Companion app. You can get to it either by searching in Google Play or entering (Opens in a new window) in your mobile browser. Alternatively, on recent Samsung and Surface Duo phones, simply pull down the Quick settings shade and choose Link to Windows. Long-press it to get to the syncing settings.

Pair your Phone and Your PC. You have a choice here between pairing using a QR code or entering a text code displayed in the PC’s Your Phone app into the phone’s companion app. We’re all for convenience and not afraid of QR codes, so we take that route. The text code is nine characters—far more than we’re up for typing in by hand. Once you’ve done either pairing method, that’s it. You’re done!

What Can You Do With a Connected Phone?

As mentioned, the spiffier functions only work on specific phone models, but any Android phone you set up with Your Phone on Windows lets you see and reply to text messages, see and manage notifications, make and answer calls, and get photos instantly on the computer.

Tætter folk deres bærbare computere typisk til deres Android-telefoner ved hjælp af telefonens dataforbindelse for at komme online fra hvor som helst. Men du kan også tænke dig at “vende om”, dele din pcs internetforbindelse med en Android-telefon eller -tablet.

Der er mange forskellige måder at gøre dette på. Du kan bruge et Wi-Fi-hotspot, Bluetooth – eller endda omvendt tether helt over et kablet USB-kabel. Det er nyttigt, når din computer har en internetforbindelse, men din telefon gør det ikke.

Opret et Wi-Fi-adgangspunkt

RELATERET: Sådan skifter du din Windows-pc til et Wi-Fi-hotspot

Den enkleste metode her vil sandsynligvis være at oprette et Wi-Fi-hotspot. Det er ligesom at oprette et Wi-Fi-hotspot på din telefon for at dele sin mobile dataforbindelse med din pc eller Mac. Men i stedet opretter du et Wi-Fi-hotspot på din computer og deler dets internetforbindelse med din Android-telefon eller tablet.

Du skal selvfølgelig have Wi-Fi-hardware til at gøre dette. En typisk bærbar computer fungerer fint. Hvis du vil omdirigere en Android-telefon eller tablet til en stationær computer, der ikke har Wi-Fi, så du kan dele sin kablede Ethernet-forbindelse, kan du købe en billig USB-til-Wi-Fi-adapter og bruge den til Dette formål.

Android-telefoner og tablets understøtter ikke ad hoc-netværk, men Virtual Router-softwaren vil oprette et Wi-Fi-hotspot, der fungerer som et adgangspunkt, så Android-enheder kan oprette forbindelse. Hvis du bruger en anden løsning, skal du sørge for at den fungerer som et adgangspunkt og ikke et ad hoc-netværk.

Vi anbefaler at bruge Virtual Router til at oprette et Wi-Fi-hotspot på en Windows-pc. Det er en praktisk front-end til de kraftfulde Wi-Fi hotspot og Internet Connection Sharing funktioner indbygget i Windows. Du kan bruge den til at dele en kablet Ethernet-forbindelse via Wi-Fi, eller endda dele en Wi-Fi-forbindelse, du er forbundet med, ved at oprette et Wi-Fi-hotspot. Dette gør det nemt i situationer, hvor du kun har et login til et Wi-Fi-netværk – som på et hotel.

Mac-brugere kan teoretisk bruge funktionen Internet Deling, der er indbygget i Mac OS X til dette, men det skaber en annonce- hoc-netværk Android-enheder kan ikke oprette forbindelse til.

Bluetooth PAN

RELATERET: Sådan skifter du din Mac til et Wi-Fi-hotspot

Du kan også bruge Bluetooth til dette. Hvis du antager, at din telefon eller tablet kører Android 4.0 eller nyere, kan du parre den via Bluetooth og bruge et Bluetooth PAN (Personal Area Network).

Du vil typisk oprette et Wi-Fi-hotspot, hvis du bruger Windows og forbinder til internettet gennem det. Wi-Fi er hurtigere og lettere at konfigurere. En Bluetooth PAN er dog særlig nyttig på Mac’er – hvis du vil dele en Macs Wi-Fi-forbindelse med en Android-smartphone eller -tabel, skal du bruge en Bluetooth PAN eller få en anden fysisk Wi-Fi-adapter (som en USB-til-Wi-Fi-adapter), da du har brug for to separate netværksgrænseflader til dette.

Aktiver internetdeling via Bluetooth på din Mac og par din Android-telefon med din Mac. Tryk på den tilsluttede enhed på din Android-enhedens Bluetooth-indstillingsskærm og aktiver afkrydsningsfeltet “Internetadgang”.

USB-kabel – kun root

RELATED: Sådan forbinder du din Android til din pcs internetforbindelse via USB

Det er muligt at binde din computer til en Android-telefon via USB, og få adgang til internettet via telefonen. Du kan måske spekulere på, om det er muligt at omdirigere en Android-telefon eller -tabel til en computer via USB, og få adgang til internettet via computerens netværksforbindelse.

Dette er muligt, men det kræver rootadgang. Vi har dækket en metode til at omdrejle en Android-telefon eller tablet til computeren via et USB-kabel ved hjælp af et Windows-program, og der findes andre lignende metoder, der bruger forskellige værktøjer eller kommandoer, du kan skrive.

USB-kabelmetoden er mest nyttige, når du er på et sted, hvor du ikke kan bruge Wi-Fi eller Bluetooth-tethering af en eller anden grund. Det er ubehageligt på grund af kravet om rodadgang og de ekstra hacks og værktøjer, der kræves for at få det til at fungere. Værre endnu, nogle Android apps vil faktisk ikke indse, at de har en internetforbindelse, hvis du gør dette. Hvis det er muligt, har du bedre mulighed for at oprette et Wi-Fi-adgangspunkt eller bruge en Bluetooth PAN til omvendt tethering.

Desværre fungerer ingen af ​​disse metoder for en Chromebook. På trods af Googles forsøg på at få Chrome OS og Android til at fungere bedre sammen, kan en Chromebook endnu ikke oprette et Wi-Fi-hotspot eller Bluetooth PAN for at dele sin internetforbindelse med andre enheder.

Det antages, at du kører Chrome OS, alligevel – Du kan potentielt sætte din Chromebook i udviklertilstand og installere et komplet Linux-system for at få adgang til Wi-Fi-hotspot-skabelsesværktøjerne, der er bygget op i typiske Linux-distributioner.

Billedkredit: Johan Larsson på Flickr

Veteran computerbrugere, eller enhver, der har ejet pc’er i flere år nu, kan huske, når 1 GB RAM blev betragtet som en masse. Ikke så længe siden kunne et 1GB hukommelsesmodul koste op til $ 100.Nu er 1 GB RAM betragtet som lavt, og de fleste stationære og bærbare computere kommer til lager med mindst 2 GB, men normalt mere. Unde

Jeg lavede for nylig et Facebook-indlæg og med sjovt inkluderet en hashtag. Til min overraskelse er hashtag faktisk blevet et rigtigt link, og hvis jeg klikker på linket, tog det mig til en stor liste over andre stillinger med den hashtag (inklusive min). Nu er jeg nysgerrig. Jeg anede ikke, at Facebook selv havde denne funktion.

Hello guys, its necessary that we enlighting you guys on how one can share a VPN connection via WIfi hotspot or USB tethering, ordinarily its not possible to share a VPN connection on android phones unless you are to do so via Bluetooth tethering and we all know that connections share via Bluetooth can be a bit slow and unsteady, so on this post we will share with you a simple out of the box tweak on how to share android phone VPN connection via wifi hotspot or USB tethering, so Read on.

First, what is a VPN?, VPN simple means Virtual Private Network, as the name suggests VPN encrypts one’s internet connection, making it private, with VPN, you can mask your internet connection and stay private while surfing your favorite websites, VPN also unblocks restricted websites or social networks since you can mask your connection its easier to access any site, one of the things I like about VPNs is the speed, with a well-coded VPNs you can enhance the browsing speed of your internet connection, and not forget that most of the free browsing cheats are powered by one VPN or the other, so to enjoy those cheats to the maximum, we might need to share those VPN powered connections to our other android phones or PC via the superspeed wifi hotspot or battery friendly USB tethering, so lets take a look at how to do so already.

How To share Android phone VPN connection With or without Root

We are to share with you simply out of the box method on how to share Android phone VPN connection, these methods consist of those that require root access to work out well and those that require no root. whichever category you are on we got you covered.

How to share Android phone VPN connection with PDA net

This method requires no root access, that’s to say that non-rooted android phones can share/ tether their VPN connection hassle-free, however, this method goes well when you want to share your VPN connection with a pc via USB Tethering, WIFI hotspot or Bluetooth, following the instructions below to get going

1. Download and install premium version PDANet+ for your Android device from here.
2. Download and install pdanet.exe file for PC here
3. Ensure your Hotspot is switched off.
4. Run the installed PDANet+ app on your Android. Launch the PDANet+.apk on your Android, there are three options :

• • USB Tether
  • Bluetooth Server
  • Wifi Hotspot

Using PDAnet+ to share android phone Vpn connection Via USB tethering

1. Ensure USB debugging is enabled on your Android (from the “Developer Options”).
2. Tap and Activate the “USB Tether” option for best reliability and connect your USB cable to the PC
3. Install the PDANet+ for PC (if not already installed) and confirm that it is connected to the phone.
4. Open the PDANet+ menu from the notification bar of your Windows and click on “Connect Internet (USB)”.
5. It will verify and authenticate your connection automatically and you will be connected via USB.

How To Share an Android VPN Connection with PDAnet Via wifi Hotspot

To Share an Android VPN Connection via Pdanet using Wifi hotspot, you will need to purchase the premium Version of PDAnet, with the version you can share your VPN connection with your pc..

Features of Pdanet

• it requires no root Access
• it works only for tethering VPN connections to a pc
• you will install the app both on your android phone and PC
• Wifi tethering requires a premium account

How To Share an Android VPN Connection Via Tethernet

Tethernet is another great app to share your VPN powered connection with another phone or pc, with tethernet you can share this connection either via a USB tethering or WiFi hotspot, however, your device needs to be rooted for Tethernet to work swiftly, adhere to the instructions below To Share an Android VPN Connection Via Tethernet.

• Download and install Tethernet android app from here
• Launch the Tethernet app and grant it root access
• Now connect your VPN, if not connected already
• On your mobile phone hotspot or USB tethering
• Return to Tethernet app and click on share via Wifi Hotspot, for Wifi connection
• Or click on Share via USB tethering, to share via Bluetooth
• Now connect the other phone, or pc to your hotspot and enjoy the connection

Features of Tethernet

• It requires Root Access to run
• it tethers your phones VPN connection through wifi hotspot and USB Tethering
• it doesn’t require the installation of the app on both devices
• it can tether your VPN connection to any device, be it smartphones or PC.

How To Share Android phone VPN Connection via DF Tethering Fix app

DF Tethering Fix app is another great tool to tether android phone VPN connection, this app equally requires root access, with a simple user interface, the app, to share your VPN connection with this app follow the instructions below

• Download the DF Tethering Fix app from here
• install the app
• launch and give root permissions
• connect your VPN, go to your phone settings and enable tethering
• now return to DF tethering fix and Click on fix Tethering
• that’s all, enjoy the connection

features of DF Tethering Fix

• requires root access
• no special configurations
• it doesn’t require the installation of the app on both devices

That’s all guys, hope I did a little justice to this topic, With any of the options above sharing your vpn powered connection becomes easier, note that most of these apps requires root access to work, you can read his detailed guide on how you can root any Android smartphone without pc

Do well to share with us any other tethering app you might be making use of, that is not listed here.

by snettscom

31st May 2014

in Information Technology, Internet Connection Sharing, Microsoft, Mobile, Networking, Windows, Windows 7, Windows XP

No Comments

It is a beautiful Saturday morning and I am seated at my desk in my small office at home, nothing much just my laptop support by a base against the arm rest of my couch or as we say “sofa-set”. I hear a notification beep, when I check it is my favorite Network Provider Safaricom alerting me to the fact that my data bundle has been depleted. You see I like having my phone’s data connection so that I do not miss anything. Some of you would say that, that is pretty expensive, well true it is very expensive hence the reason for this post.

On my laptop I have a dedicated unlimited high speed internet connection which I am thinking I can share with my phone. Why not? It would save me so much if I just connect my mobile to my laptop wifi. In your case, we are going to do what we call Reverse Tethering that is How to Connect your Mobile to your Laptop WIFI.

So lets get started.

Sharing internet connection between your mobile device and your laptop is something that we have all done at some point. Traditional tethering involves using a cell phone as a modem to get a laptop or tablet online. In this case we want to connect your Android phone or iPhone, tablet, or other mobile device to your laptop WIFI. We will achieve this by a concept known as Reverse Tethering.

Why Reverse Tether

Some of you might ask why we would want to that, why not just use our phones 3G or 4G interface. Well, fro m my experience above you get a pretty good reason why.

The following situations might apply:

• You office IT department has probably blocked Wi-Fi connections to mobile phones because of an Company Policy but you can access internet from your laptop Wi-Fi or Ethernet Connection.
• Internet access is basically faster over Wi-Fi than on 3G/4G especially if you have a dedicated connection like the one I boast.
• You love travelling and you are at a destination where the hotel has only one wired Ethernet Internet connection and no Wi-Fi, bummer.

How to Connect your Mobile to your Laptop WIFI

Say you are connected to your internet at the office using wire and what we are basically doing is turning your laptop into a Wi-Fi hotspot. Doing this for other laptops is easy, I will do a short post about it, be sure to check back regularly.

On Windows: Using Internet Connection Sharing (ICS): ICS is built into machines running Microsofts range of Operating Systems from Windows 98 and above. Using Internet Connection Sharing is fun and you can see an example where I share my modem connection from my PC.

On Windows 7: Use Connectify (Preferred): When connecting your Mobile device to your Laptop Wi-Fi you won’t be able to use the same Wi-Fi that connects you to the Internet to share it unless you use a third-party application like Connectify.

Connectify from the description on their site – Share 3G / 4G, boost Wi-Fi, and more with our software router, Connectify Hotspot, or combine all your Internet connections with Connectify Switchboard. Connectify is available for all devices that run Windows 7 and above. It offers advantages such as it is the most secure method for sharing you connection, since it offers WPA2 encryption instead of WEP which even teenagers nowadays know how to crack.

Instructions to Connect your Mobile to your Laptop WIFI:

1. Download and install Connectify (from CNet).
2. Click on the Connectify logo in the Notification Tray at the bottom right of your desktop (the icon looks like a radio wave).
3. Select the Internet connection you want to share.
4. Now you’ll create a wi-fi hotspot: choose a name for your wireless network.
5. Choose a wireless password. The network is encrypted with WPA2-AES encryption.
6. Select “Access Point” mode to turn your laptop into a wi-fi access point; if it’s not available you’ll have to choose “Ad Hoc”, which is less secure and has other limitations (learn about ad hoc wireless networks)
7. Click the Start Hotspot Sharing button to turn on the wi-fi network
8. On the client devices, you should be able to see the new wi-fi network you just created and use standard wi-fi connection instructions to connect to that wireless network.

On Windows/Android: How to connect your Android Phone to your Laptop WIFI – requires apps installed on your Android Phone. There are several apps that are available in the Google Play Store. All you have to do is search for the term Reverse Tethering and you should see a bunch of Apps returned.

Alternative: Wireless Travel Routers

This is for the non-techie–if at all the above instructions do not work for you, or you don’t want to install any third-party software on your laptop, or maybe the IT department has given you a standard user account and you do not have installation privileges then you can purchase an inexpensive travel router. The best that I have tried and tested is the NETGEAR Trek N300 Range Extender and Travel Router (PR2000) shown below, which is so small it can fit in your pocket. If you purchase it from Amazon you get Free Shipping in the US and also a 42% discount.

Related

snettscom

SNETTSCOM is an IT company. We excel at providing solutions in systems integration, consultancy, outsourcing, applications development, networking and security. Aside from this, SNETTSCOM also specializes in creative design and marketing.

• Forum posts: 16

Jan 11, 2020, 2:06:47 PM via Website

Jan 11, 2020 2:06:47 PM via Website

Hi guys! I made a USB tethering and reverse tethering app that doesn’t require root. It also doesn’t require you to enable USB debugging (except on Windows, I’ll try to fix that in a future release). It uses USB accessory mode which can make it faster than apps that use ADB.

Tethering
This allows you to share your device’s wifi or mobile internet connection with your PC. You can use this if your carrier or data plan doesn’t allow you to enable the built-in tethering feature of your device. Or if you have unlimited data plan, but your carrier caps your hotspot/tethering usage to a certain amount, say 7GB.

Reverse Tethering
This feature allows you to share your PC’s internet connection with your device. I use this to reduce lag when playing online games because my room has an unstable wifi signal and my PC is already connected to the internet via an ethernet cable. You can also use this if you’re in a place where your PC has access to wired internet and there’s no wifi available.
Note: Some apps only check for wifi or cellular connectivity, thus will not work when reverse tethering.

Network
When tethering or reverse tethering, your PC along with all connected devices will be in the same network. This means a device can communicate with your PC and other connected devices. This is useful if you want to transfer files from one device to another or if you want to access a server (e.g. HTTP server) on your PC from your device.
Note: ICMP is currently not supported so the ping command will not work when tethering or reverse tethering.

Additional Features
• No root required
• No USB debugging required (except on Windows)
• Fast link speed (200Mbps+ on some devices)
• IPv6 support (may not work on some devices)
• Up to five devices can be connected
• Configurable network settings

Whether you’re working from your backyard, a park, or a bus, there are times when you need a Wi-Fi connection on your laptop and you’re out of range of a network or public hotspot. Never fear: As long as you have your phone handy, you can deliver a personal and private network to your tablet or laptop in seconds.

To get started, you’ll need to go to the network settings on your phone. It’s called different things depending on which Android phone you’re using—Network & Internet on Android 10, Connections on One UI on Galaxy phones, etc.—but it’ll be where you select your Wi-Fi network. Inside, look for a tab that says hotspot or tethering.

The Personal Hotspot settings let you broadcast your mobile connection as a Wi-Fi signal to any device.

There will be three options: Mobile Hotspot, Bluetooth tethering, and USB tethering. Here’s how each of them works:

Mobile/Wi-Fi hotspot: This is the method you’ll probably be using the most. As soon as you flip the toggle to on, your phone will begin sending out its own WLAN network that other devices can find in their network list. By default, a random password will be assigned, but both that and the name can be changed. To connect, simply choose the correct name on your other device, type in the password, and you’ll be connected to the Internet.

Bluetooth tethering: When you set up a mobile hotspot, anyone is able to jump on to your phone’s network if they know your password. By tethering you can keep it private. First, you’ll need to pair your phone with the device you want to share your connection with, so head over to your Bluetooth settings, tap Pair new device, and select the device you want to pair.

Then head back to your phone’s network settings and flip on the Bluetooth tethering toggle. Next, you’ll need to go to your laptop and select Bluetooth PAN as your network connection and connect to your Android phone. That will initiate the tethering, and you can use your phone’s mobile data on your laptop. Just note: This method is significantly slower than a hotspot, but will use less battery life.

USB tethering: This option will appear grayed-out unless you have a USB-C cable connecting your phone to your laptop. Once plugged in and flipped on, it should be automatic, with your computer instantly recognizing the new network and connecting to it.

Obviously, whatever work you do will use your allotment of mobile data, so if you have a limited plan, be mindful of what you’re doing. Websites and email will be fine, but streaming video might be an issue, especially as 5G plans become more commonplace. So keep an eye on your data use.

I have Ubuntu 16.04 on my PC.

Is there a way to create a wired connection between my PC and smartphone so the smartphone can be connected to internet via the PC?

2 Answers 2

The answer may not work on your phone. The following worked on my phone

My phone was Google Nexus 6P running factory standard Android 8.x Oreo

This process is called USB reverse tethering. Not all phones support it. Some Android phones have to be rooted for this to work. There are some guides in the links below.

You may need an app on your phone. I didn’t need it.

My phone is not rooted. This is what I did:

First, find the MAC address of the USB port you will use

Connect your phone to your PC using an USB cable.

1. Turn USB tethering on in your phone. This will use your phone’s mobile data to connect the PC to the Internet. This is not what we want, but this will give us the device address we will use later.
2. Open the Network Manager edit window from the Network icon on the top right corner.
3. Highlight the USB connection. It may be called Ethernet Connection 1 or Ethernet Connection 2 .
4. Click on the Edit button and go to the Ethernet tab.

Copy the information in the Device field:

Press cancel button to get out of the Network Edit menu. Do not close the Network Connections window yet.

Second, setup a new network connection

Click Add in network connections:

Give the new connection a new name if you want.

Go to the Ethernet tab and paste the device information you copied.

Go to the IPv4 Settings tab and select Shared to other computers:

Save and close network connection windows.

Third, Test with your phone

1. In your phone, turn off mobile data, and WiFi while connected by USB to the PC.
2. Surf the web and use other Internet connected apps.

It looks like the USB port gets a random Ethernet MAC address every time it is plugged in. If this is the case, you will have to first find the MAC address and then edit the saved settings every time you want to do this.

You all know mobile tethering – we’ve all used it once in our lives. In fact, the feature to be able to share your Android smartphone’s data connection to other devices (laptop, desktop, tablet, etc.) via WiFi hotspot has been standard in most smartphones since a couple of years back. But how about going the reverse – that is, sharing your desktop or laptop’s wifi connection to your Android device?

Ok, we get that you might not see the point – your Android smartphone should be able to take in a WiFi connection easily. But just to expand the point, what if there was a way to share your laptop’s network connection to your Android device over USB? You might need it if your phone’s wifi is somehow broken and you don’t have a strong cellular data signal. Whatever the situation is, SimpleRT is the project that can make it happen.

The app is still in development, but the developer has published his code via Github. No root is required for the app, and even no ADB as well, which is a surprise. You just run the PC-side console program, connect your device via USB and it should work. There are some initial steps/permissions when you first run it, but that’s pretty much normal.

We don’t actually know what the intended use is, but it is nice to know that this can be done. Try the app if you want to, and let us know how it goes. Check out the source link below.

Today’s smartphones can double-up as modems, when connected to a computer. It now appears it is possible to reverse the link and run the smartphone through an Internet connection.

This may sound crazy but reverse tether apps do exist on the Android Market and the idea of sharing an Internet connection could actually come in useful during power outages or network failures.

The other benefit is the battery use will be constant, as long as the smartphone is attached with a USB cable. In addition, if you are running a limited plan, then reversing tethering could allow you to access fast download speeds over the computer’s broadband connection. As long, therefore, as the USB cable is around, you are all set to enjoy a secure Internet connection without additional charges, according to RedmondPie.

Once you get online, you could play games, browse the web, sync mail or download updates without any hassle. However, the app does cost a reasonable amount – approximately £3; it does have a free trial period though.

The catch is that your Android device must be rooted in order to successfully establish the connection. In addition, this technique works only on devices with tether option, requiring a fully stable Internet connection running on your computer. On the positive side, no additional software is necessary for either machine. You will just have to edit the Network Configuration to share the Internet connection with your smartphone.

Download Reverse Tether for Android from here. The app is priced at £3.12 and is also available for download through GooglePlay. Although there are various other methods to root your device, it is advisable to go with the Reverse Tether app, which is quicker and simpler.

If you own a smartphone, you have probably become accustomed to having a wireless internet connection where ever you go. On the other hand, unless you picked up a MiFi (personal hotspot) or have a 3G plan for your tablet, that same internet connection for your tablet or computer is restricted to your house, or in some cases, your neighbors house. But what if all you had to do was push a button on your phone and you could share your smartphone’s data with with your tablet(s)? Well, you can.

With newer versions of Android and iOS, smartphones started to become WiFi hotspot’s and tethering devices. This “How To” could end right here if I told you that Verizon, AT&T, Sprint and other wireless providers have plans for sharing your data with your other devices. Generally, they cost $20-$30/month and you get around 2-4GB. But since Android is so open, you can do the exact same thing for free. Finally, we cannot really consider the following apps “illegal” because they are still in the Android Market. Generally, if the app was illegal, it would have been removed already.

PdaNet Tablet (beta)

Now that you have the app installed on both of your devices, open the application on both devices to get started. Once PdaNet has loaded up, click the “Run As Server (Phone)” button on your data enabled smartphone. In addition, click the “Run As Client (Tablet)” button on your tablet. PdaNet does a nice job of keeping the instructions nice and simple. So now, the last thing you have to do is click the “Set Network Proxy”button on your tablet. Once your tablet discovers your phone via Bluetooth, simply tap on your phone to finish the connection. Please “Make sure you clear proxy settings when you are done with using PdaNet so that network connections will be back to normal. Do not uninstall PdaNet without doing this!”

PdaNet claims that the regular PdaNet app is capable of sharing data speeds up to 100 MB/s. However, the tablet application is a different connection entirely. So don’t worry if you do not see 4G speeds on your tablet.

If your looking for a data sharing solution with less limits, look no further than rooting your phone. After you do that, you can download Barnacle WiFi Tether or Open Garden Wifi Tethering.

If you want to share data to your computer without rooting your phone, you can download PdaNet 3.02 free from the Android Market.

• Computer
• Computer

Paano Baligtarin ang Tether ng isang Android Smartphone o Tablet sa Iyong PC

Karaniwan, naitatago ng mga tao ang kanilang mga laptop sa kanilang mga Android phone, gamit ang koneksyon ng data ng telepono upang makapag-online mula saanman. Ngunit maaaring gusto mo ring “baligtarin ang tether,” na ibinabahagi ang koneksyon sa Internet ng iyong PC sa isang Android phone o tablet.

Mayroong iba’t ibang mga paraan upang magawa ito. Maaari kang gumamit ng Wi-Fi hotspot, Bluetooth – o kahit na ganap na i-reverse ang tether sa isang wired USB cable. Kapaki-pakinabang kapag ang iyong computer ay may koneksyon sa Internet, ngunit wala ang iyong telepono.

Lumikha ng isang Wi-Fi Access Point

KAUGNAYAN:Paano Lumiko ang Iyong Windows PC Sa isang Wi-Fi Hotspot

Ang pinakasimpleng pamamaraan dito ay malamang na lumikha ng isang Wi-Fi hotspot. Ito ay tulad ng paglikha ng isang Wi-Fi hotspot sa iyong telepono upang ibahagi ang koneksyon ng mobile data nito sa iyong PC o Mac. Ngunit, sa halip, lilikha ka ng isang Wi-Fi hotspot sa iyong computer at ibinabahagi ang koneksyon sa Internet nito sa iyong Android phone o tablet.

Siyempre, kakailanganin mo ang Wi-Fi hardware upang magawa ito. Ang isang tipikal na laptop ay gagana nang maayos. Kung nais mong i-reverse-tether ang isang Android phone o tablet sa isang desktop computer na walang Wi-Fi upang maibahagi mo ang koneksyon nitong wired Ethernet, maaari kang bumili ng isang murang USB-to-Wi-Fi adapter at magamit ito para sa ang hangaring ito

Hindi sinusuportahan ng mga teleponong Android at tablet ang mga ad-hoc network, ngunit ang Virtual Router software ay lilikha ng isang Wi-Fi hotspot na gumana bilang isang access point, na pinapayagan ang mga Android device na kumonekta. Kung gumagamit ka ng isa pang solusyon, tiyaking gumagana ito bilang isang access point at hindi isang ad-hoc network.

Inirerekumenda namin ang paggamit ng Virtual Router para sa paglikha ng isang Wi-Fi hotspot sa isang Windows PC. Ito ay isang maginhawang front-end sa malakas na Wi-Fi hotspot at mga tampok sa Pagbabahagi ng Koneksyon sa Internet na naka-built sa Windows. Maaari mo itong magamit upang ibahagi ang isang koneksyon sa wired Ethernet sa Wi-Fi, o magbahagi ng isang koneksyon sa Wi-Fi na nakakonekta ka sa pamamagitan ng paglikha ng isang Wi-Fi hotspot. Ginagawa nitong maginhawa sa mga sitwasyong mayroon ka lamang isang pag-login para sa isang Wi-Fi network – tulad ng sa isang hotel.

Teoretikal na maaaring gamitin ng mga gumagamit ng Mac ang tampok na Pagbabahagi ng Internet na naka-built sa Mac OS X para dito, ngunit lumilikha ito ng isang ad-hoc network na mga Android device na hindi makakonekta.

Bluetooth PAN

KAUGNAYAN:Paano Gawin ang iyong Mac sa isang Wi-Fi Hotspot

Maaari mo ring gamitin ang Bluetooth para dito. Ipagpalagay na ang iyong telepono o tablet ay nagpapatakbo ng Android 4.0 o mas bago, maaari mo itong ipares sa Bluetooth at gumamit ng isang Bluetooth PAN (Personal na Area Network).

Karaniwan, gugustuhin mong lumikha ng isang Wi-Fi hotspot kung gumagamit ka ng Windows at kumonekta sa Internet sa pamamagitan nito. Ang Wi-Fi ay mas mabilis at mas madaling i-set up. Gayunpaman, ang isang Bluetooth PAN ay partikular na kapaki-pakinabang sa mga Mac – kung nais mong ibahagi ang isang koneksyon sa Wi-Fi ng Mac sa isang Android smartphone o tablet, kakailanganin mong gumamit ng isang Bluetooth PAN o kumuha ng pangalawang pisikal na Wi-Fi adapter (tulad ng isang USB-to-Wi-Fi adapter), dahil kailangan mo ng dalawang magkakahiwalay na interface ng network para dito.

Paganahin ang Pagbabahagi ng Internet sa pamamagitan ng Bluetooth sa iyong Mac at ipares ang iyong Android phone sa iyong Mac. Tapikin ang nakakonektang aparato sa screen ng mga setting ng Bluetooth ng iyong Android device at paganahin ang checkbox na “Pag-access sa Internet”.

USB Cable – Root Lamang

KAUGNAYAN:Paano Ikonekta ang Iyong Android sa Koneksyon sa Internet ng iyong PC Sa paglipas ng USB

Posibleng i-tether ang iyong computer sa isang Android phone sa pamamagitan ng USB, i-access ang Internet sa pamamagitan ng telepono. Maaari kang magtaka kung posible na i-reverse-tether ang isang Android phone o tablet sa isang computer sa pamamagitan ng USB, pag-access sa Internet sa pamamagitan ng koneksyon sa network ng computer.

Posible ito, ngunit nangangailangan ito ng pag-access sa root. Nakatakip kami ng isang paraan upang ma-reverse-tether ang isang Android phone o tablet sa computer sa pamamagitan ng isang USB cable gamit ang isang application ng Windows, at may iba pang mga katulad na pamamaraan na gumagamit ng iba’t ibang mga tool o utos na maaari mong mai-type.

Lalo na kapaki-pakinabang ang pamamaraan ng USB cable kapag nasa isang lokasyon ka kung saan hindi mo magagamit ang Wi-Fi o pag-reverse ng tethering ng Bluetooth sa ilang kadahilanan. Nakakainis dahil sa kinakailangan para sa pag-access sa ugat at mga karagdagang pag-hack at tool na kinakailangan upang maisagawa ito. Mas masahol pa, ang ilang mga Android app ay hindi talaga mapagtanto na mayroon silang koneksyon sa Internet kung gagawin mo ito. Kung maaari, mas mahusay kang mag-set up ng isang access point ng Wi-Fi o gumamit ng isang Bluetooth PAN para sa reverse-tethering.

Sa kasamaang palad, wala sa mga pamamaraang ito ang gagana para sa isang Chromebook. Sa kabila ng mga pagtatangka ng Google na paganahin ang Chrome OS at Android na gumana nang mas mahusay, magkakaroon pa ang isang Chromebook ng isang Wi-Fi hotspot o Bluetooth PAN upang ibahagi ang koneksyon sa Internet nito sa iba pang mga aparato.

Ipagpalagay na nagpapatakbo ka ng Chrome OS, gayon pa man – maaari mong mailagay ang iyong Chromebook sa mode ng developer at mai-install ang isang buong sistema ng Linux upang makakuha ng pag-access sa mga tool sa paglikha ng Wi-Fi hotspot na binuo sa mga karaniwang pamamahagi ng Linux.

tutorial by Codrut Neagu published on 07/20/2020

Sharing the internet data connection available on your mobile smartphone with your Windows PC through a USB cable is called USB tethering. In other words, if you’re wondering “what is USB tethering?”, the answer is quite simple: it’s a way of using your Android smartphone as a modem or router to get mobile internet via USB on any PC. Say you have access to a Wi-Fi network in your home but your desktop PC doesn’t have a wireless card in it. You might want to use your Android’s USB tethering feature to establish a connection between them. Or, what if you find yourself in a situation where you don’t have any internet access except for your generous mobile data plan on your Android phone. You might want to give some of that to your Windows computers and devices, right? Here’s how to share internet from an Android phone to any PC via USB:

NOTE: To create this guide, we used a Huawei P20 smartphone running Android 10. Although some screenshots might differ a bit on a smartphone running another flavor or version of Android, most settings should look and work the same.

Step 1. Enable internet on your Android smartphone

The first thing you should do is make sure that your Android smartphone has internet connectivity. The easiest way to do that is from the Quick settings panel. To get to it, swipe with your finger from the top of the screen – if you don’t see it, swipe twice. Then, on the actions panel, look for the Wi-Fi or Mobile data buttons and tap on the internet connection that you want to enable and use as the internet source for USB tethering.

The Settings app also offers you an alternative method to enable the internet connection on your Android. Slide your finger from the top of the screen and tap on the Settings button. It’s the one that looks like a small gear. For more ways to open Settings, read: 5 ways to get to the Android Settings menu.

Then, if you want to use a wireless network to connect to the internet on your Android, go to Wi-Fi, turn it on, select and connect to a Wi-Fi network.

If you don’t have Wi-Fi access or if you prefer to use your mobile data plan as the internet source for USB tethering, on the Settings screen, go to Mobile network. Look for an entry called Mobile data and make sure that its switch is turned on.

Step 2. Connect your Android smartphone to your Windows PC using a USB cable

Use a USB cable to connect your Android smartphone to your Windows PC. If you still have it, it’s preferable that you use the original USB cable that you received with your Android smartphone. If you use a desktop PC, it’s also recommended to use one of the back USB ports to plug the USB cable. They are usually faster and more reliable than those on the front.

Step 3. Turn on the USB tethering feature on your Android smartphone (share internet from Android to PC)

Once you’ve connected your Android smartphone to your Windows PC, get back to your smartphone and open its Settings again. Then, go to the Mobile network and tap to open the Tethering & portable hotspot settings panel. There, turn the USB tethering switch on.

Step 4. Wait for a moment or two until your Windows PC installs the required drivers

On your Windows PC, you might see the operating system install a series of drivers that are necessary for the USB tethering to work. That’s because your Android smartphone works as a USB modem and your Windows PC needs the appropriate drivers for it. This process should be done in a moment, and it’s something that takes place only the first time you use your Android smartphone to connect to the internet on your PC through a USB cable.

That was it! Now you should have internet connectivity on your Windows PC, through the USB cable that is connected to your Android smartphone or tablet. Open your favorite web browser and start browsing the web.

Ending with a warning or two

Although connecting to the internet through your Android smartphone’s USB connection is easy, keep in mind the following points:

• If you’re using your mobile data plan, that can incur high costs if you overstep your plan’s boundaries, depending on your contract with the mobile operator.
• While using your smartphone’s internet connection through USB, the smartphone might charge slower than usual. Although that can be a good thing because it doesn’t let your smartphone’s battery die, it can also be a problem if your Windows device is a laptop or a tablet that is not connected to a power plug. Unless your Windows device is connected to a power socket, its battery will deplete faster than usual, because it’s also charging your Android device.

Do you share mobile internet via USB to your laptop or PC?

Now you know how easy it is to use your Android smartphone or tablet to get internet access on any Windows PC, whether it’s a desktop computer, a laptop, a 2-in-1, or a tablet. Do you find the USB tethering feature useful? Do you use it often? Let us know in the comments below.

Uživatelé obvykle připoutávají své notebooky do svých telefonů Android a využívají datové spojení telefonu, aby se dostali online odkudkoli. Můžete také chtít “obrátit zpět” sdílením připojení k počítači s telefonem nebo tabletem Android.

Existuje mnoho způsobů, jak to provést. Můžete použít Wi-Fi hotspot, Bluetooth – nebo dokonce zpětně přetáhnout přes kabelový USB kabel.

Vytvořte přístupový bod Wi-Fi

SOUVISEJÍCÍ: Jak přeměnit počítač se systémem Windows na hotspot Wi-Fi

Nejjednodušší metodou zde bude pravděpodobně vytvoření hotspotu Wi-Fi. Stejně jako vytvoření hotspotu Wi-Fi ve vašem telefonu a sdílení jeho mobilního datového připojení s počítačem nebo Mac. Místo toho vytvoříte na svém počítači hotspot Wi-Fi a sdílíte jeho připojení k internetu pomocí telefonu nebo tabletu Android.

Samozřejmě budete potřebovat hardware Wi-Fi. Typický notebook bude fungovat dobře. Chcete-li telefon nebo tablet Android přenést zpět na stolní počítač, který nemá Wi-Fi, abyste mohli sdílet své kabelové ethernetové připojení, můžete si koupit levný adaptér USB-to-Wi-Fi a použít jej

Telefony a tablety Android nepodporují sítě ad-hoc, ale software Virtual Router vytvoří hotspot Wi-Fi, který funguje jako přístupový bod umožňující připojení zařízení Android. Používáte-li jiné řešení, ujistěte se, že funguje jako přístupový bod a ne jako síť ad-hoc.

Doporučujeme používat virtuální směrovač pro vytváření hotspotu Wi-Fi v počítači se systémem Windows. Je to pohodlný přední přístup k výkonným funkcím hotspot Wi-Fi a sdílení připojení k Internetu, které jsou součástí systému Windows. Můžete jej použít k sdílení kabelového připojení k síti Ethernet po síti Wi-Fi nebo ke sdílení připojení Wi-Fi, ke kterému jste připojeni, vytvořením hotspotu Wi-Fi. To je výhodné v situacích, kdy máte pouze jedno přihlášení k síti Wi-Fi – jako v hotelu.

Uživatelé Mac by teoreticky mohli využívat funkci sdílení internetu zabudovanou v systému Mac OS X, hoc se zařízení se zařízením Android nemohou připojit.

Bluetooth PAN

SOUVISEJÍCÍ: Jak otočit váš počítač do Wi-Fi hotspotu

Také můžete použít Bluetooth. Za předpokladu, že váš telefon nebo tablet běží s Androidem 4.0 nebo novějším, můžete jej spárovat přes Bluetooth a používat Bluetooth PAN (Personal Area Network).

Obvykle budete chtít vytvořit hotspot Wi-Fi, na internet přes to. Wi-Fi je rychlejší a snadnější nastavení. Bluetooth PAN je však obzvláště užitečná pro počítače Mac – pokud chcete sdílet spojení Wi-Fi se zařízením smartphone nebo tablet Android, musíte použít Bluetooth PAN nebo získat druhý fyzický adaptér Wi-Fi (například USB-to-Wi-Fi adaptér), protože pro toto potřebujete dvě samostatná síťová rozhraní.

Povolte sdílení Internetu přes Bluetooth na počítači Mac a spárujte telefon s Androidem se systémem Mac. Klepněte na připojené zařízení na obrazovce nastavení Bluetooth zařízení zařízení a povolte zaškrtávací políčko “Internet access”.

USB kabel – Pouze kořenový

SOUVISEJÍCÍ: Jak připojit zařízení Android k připojení k Internetu přes USB

Je možné připojit počítač k telefonu Android přes USB a přístup k internetu prostřednictvím telefonu. Možná se zeptáte, zda je možné telefony nebo tablety Android přenést zpět na počítač přes USB, přístup k internetu prostřednictvím síťového připojení počítače.

To je možné, ale vyžaduje přístup k serveru root. Pokryli jsme způsob, jak telefonem nebo tabletem Android přetáhnout k počítači pomocí kabelu USB pomocí aplikace Windows a existují další podobné metody, které používají různé nástroje nebo příkazy, které můžete zadat.

Metoda kabelu USB je nejvíce užitečné, když jste z nějakého důvodu v místech, kde z nějakého důvodu nelze použít Wi-Fi nebo Bluetooth. Je to nepříjemné kvůli požadavku na přístup k root a dodatečným hackům a nástrojům potřebným k tomu, aby to fungovalo. Ještě horší je, že některé aplikace Android nebudou skutečně uvědomovat, že mají připojení k internetu, pokud tak učiníte. Pokud je to možné, je lepší nastavit přístupový bod k Wi-Fi nebo používat funkci Bluetooth PAN pro zpětné připojení.

Bohužel žádná z těchto metod nebude fungovat pro Chromebook. Navzdory snahám společnosti Google zlepšit spolupráci s operačním systémem Chrome OS a Androidem, Chromebook ještě nemůže vytvořit hotspot Wi-Fi nebo Bluetooth PAN a sdílet jeho připojení k internetu s jinými zařízeními.

Za předpokladu, že používáte systém Chrome OS – můžete potenciálně dát svůj Chromebook do režimu vývojářů a nainstalovat úplný systém Linux, abyste získali přístup k nástrojům pro vytváření hotspotů Wi-Fi postavených v typických linuxových distribucích.

Image Credit: Johan Larsson na Flickr

Máte zcela novou kapacitu flash disku, která může ukládat více než pevný disk vašich prvních tří počítačů ale při kopírování velkého souboru to popírá. Co dává? Přečtěte si, jak vám ukážeme, jak vyřešit vaše frustrace z flash disku. Vážený How-To Geek, Nedávno jsem zakoupil 64 GB flash disk USB 3.0, zapojil ho do počítače a začal kopírovat některé soubory na něj chtěli přenést do jiného počítače.

Windows 10 byl vydán do širšího světa, ale program “Windows Insider” pokračuje. Testeři získají přístup k novým funkcím systému Windows před všemi ostatními, stejně jako Windows Insiders mohou používat Windows 10 měsíce předtím, než to zbytek světa dosáhne. Pokud máte počítač se systémem Windows 10, můžete se přihlásit do programu Windows Insider k získání náhledů.

Use PdaNet+ to turn your smartphone into a modem for your laptop

• Tweet
• Share
• Email

• Tweet
• Share
• Email

PdaNet+ turns your smartphone into a modem for your laptop in a procedure known as tethering. This capability means you don’t have to worry about finding a Wi-Fi hotspot. As long as you have cellular data coverage, you can work online on your laptop.

PdaNet+’s Android version enables tethering via USB cable or over Wi-Fi via its Direct Hotspot connection feature. You can use the free version of PdaNet+ if you don’t mind interruptions, but the full version costs less than $10 as of late 2018 and allows unfettered access to secure websites after a 30-day trial period.

Many smartphones now offer built-in hotspot functionality, which you can usually find in Settings > Tethering (or similar term). If your phone has this capability, you don’t need a separate app.

Download and Install PdaNet+ on Your Windows PC

Setting up PdaNet+ is a matter of installing it on both your smartphone and your Windows computer.

Install PdaNet+ on your computer. The setup on the computer side is straightforward, although there are several steps involved. Start by running the installer. The first part will ask you some basic questions about how you want to install PdaNet+. Generally, the defaults are alright.

During the installation, PdaNet+ will ask you to connect your Android device. Stop, and turn your attention to your phone.

Download PdaNet+ from the Google Play Store. (The developer is June Fabrics Technology Inc.)

For PdaNet to connect, you’re going to need to enable USB debugging on your Android device. If you haven’t already, take a moment to do that.

Connect your phone to the computer via USB.

Open the PdaNet+ app on Android, and select USB Tether.

Press Ok back on the Windows installation window.

Next, Windows will warn you that the PdaNet+ installer is looking to install a new device. Press Install to continue.

The installer will then ask you to allow USB debugging when prompted on your Android device.

Open your Android device, and you should see the debug request. Select Always Allow from this computer, and press Ok.

The Windows installer will let you know that the install completed successfully. Make sure the Connect PdaNet+ after installation is selected, and choose USB mode. Then, press Finish.

Turn to your Windows PC. You’ll see that you’ve successfully connected. In the future, you’ll use the PdaNet+ icon in your system tray to connect on Windows and the App on Android.

When you get a Connected! notification on your laptop, you’ll be able to surf the web using your Android’s data connection.

• Home
• Forums
• Acer
• Acer Iconia A500

Breadcrumb

housas08

Senior Member

• May 3, 2011

hello everyone!
I was trying to find a way to connect my iconia via usb with my laptop and use my internet access for instances that wifi isn’t available.

I searched a lot but there wasn’t any usefull clear guide. So after some failing attempts, finally i managed to succeed (using win 7). Here are the steps:

*root is required*

1. install (i used stable version 1.2 but i don’t think 1.4 will make any problems) but do not enable it yet.

2. Install USB drivers from Android SDK instructions found here: , later you will also need RNDIS drivers because when you connect the tablet with your pc and enable wired tether it will install the drivers. I found working drivers from HTC sync located at C:\Program Files (x86)\HTC\HTC Driver\Driver Files\Win7_x64\htcrndis.inf

you have to install them manually from the device manager (pick the: HTC Remote NDIS based device)

3. now that we have completed the installation with Wired Tether (still leave it running), we are ready to proceed to the next step. Open network connections. You will notice that now there is one more. (in my case no1 is local area and no2 local area 5 (the one wired tether created). select the connection you want to share go to properties and enter “sharing tab”. tick “Allow other network users to connect through this computer’s Internet connection” and pick the connection made by wired tether. Hit apply and you will have bridged the two connections.

4. open any emulator on your tablet and type:

at ifconfig command you enter an available ip of your router for example if your pc is connected to 192.168.1.7 you can pick 192.168.1.9 that is free.
at the second line enter the default gateway of your internet connection found under the detailed view of its options.
setprop “net.gprs.http-proxy” “” is in case you are NOT behind a proxy server

5. wait about 15 seconds and.
enjoy!

each time you enable wired tether you have to type in:
su
netcfg usb0 dhcp

to undo the hole “reverse usb” thing, simply unbridge the 2 connections, restart wired tether and you are ready to use it for normal tethering.

browsers work fine, facebook, pulse, tunein. i haven’t tested many apps yet.
issues: Market browsing is ok but downloading apps not, some apps do not work.

I have been trying to share my wired Internet connection with my Android phone. However I could not succeed in doing this. Has anyone of you ever succeeded? Operating systems that I use are as follows:

• Ubuntu 10.10
• Android 2.3

8 Answers 8

Yes, it is possible. I have Ubuntu 11.04, NetworkManager 0.8.4, Android Nexus One phone running Cyanogenmod 7.

As described by Roman, right-click on the NetworkManager icon and choose “Create new wireless network”. I chose to leave the connection wide open (no WPA, no WEP). My phone was able to see the network right away and I connected without trouble. The bridging was automatically done so I could browse the internet without configuring anything extra.

The reason why you having trouble with the above method is because stock Android 2.3 doesn’t support ad-hoc networks. To be precise, Android’s wpa_supplicant does not show ad-hoc networks. There are a number of ways to fix this. Google around and go hunting in the xda-developers forums. You will probably need to do some hacking on your phone that is beyond the scope of this answer.

My personal recommendation: if your phone supports Cyanogenmod, you can install it to get ad-hoc support and other hackish delights. You will need to root your phone, which may or may not be to your taste.

Another alternative is to try “Infrastructure mode”. After setting up the ad-hoc wireless network as per above, click on the NetworkManager icon, choose “Edit connections”. Hit the wireless tab and Edit the ad-hoc network you just created. Under Mode, choose “Infrastructure”. I am unsure if this will work for you since I don’t have a stock Android phone to test with. My thought is if ad-hoc mode is the problem, then the another mode might be the solution.

In an ordinary world where we can freely work outside of our homes, a reliable internet connection is necessary. The ability to open a hotspot and work on the go is second to none. It used to involve complicated cables and special apps, but those days are behind us. Now, you just need a phone, computer, and a charging cable. Here are a few easy ways to tether your Android phone to your Windows computer.

Of course, you’ll need access to data to make this work. Whether that means a wired connection or setting up a hotspot, there’s a good chance that you already have plenty of data. Now, we’ll run you through three of the most common ways to tether your phone and computer. Ready to get connected? Let’s go.

Tether via USB

The fastest way to connect your computer to the internet is with a USB tether. It’s also the only method that requires extra hardware — but it’s only your phone’s charging cable. Simply connect your phone to your computer to get started.

1. Once connected, navigate to the Hotspot & Tethering menu in the Android System popup. Toggle the USB Tethering option to On.
2. Now, your computer should acknowledge the new connection source. Once it becomes available, simply select the network like you would with any other connection.

Tether over Wi-Fi

All Android devices feature a built-in Wi-Fi hotspot, which is probably the simplest way to share your internet access. Unfortunately, some carriers block this feature if you’re not paying for a hotspot plan. You can always root your device or upgrade to a more expensive plan as a workaround, though. Here are the steps you need to activate your Wi-Fi tether:

1. Head to the same Network & Internet section of your Settings app.
2. Locate and open the Hotspot & Tethering menu.
3. You should now see four options — Wi-Fi hotspot, USB tethering, Bluetooth tethering, and Ethernet tethering. Select your Wi-Fi hotspot and toggle it to On.
4. You can also change the name and password of your hotspot to secure your data. Just be careful to keep your security set to WPA2 PSK for the best protection.
5. Now you can connect your laptop, tablet, or another device to the hotspot just like you would with any other Wi-Fi network. Don’t forget to toggle your hotspot back to Off when you finish to preserve your data.

Tether with Bluetooth

One last way to tether your computer to your Android device is with Bluetooth. Sure, you have to take the extra step of pairing the two, but we connect new Bluetooth devices all the time. The steps aren’t much more demanding, so here’s what you need to know:

1. Open the settings menu on your Windows 10 laptop and head to the Bluetooth settings. Make sure your computer is set to Discoverable.
2. On your phone, head into the Bluetooth settings and look for your computer to appear. This is where it may help to have a unique name for your computer, just in case.
3. Now, select the prompt to pair on both devices.
4. Once your phone is paired to your laptop, head into the settings and locate the Network & Internet section. Open the Hotspot & Tethering options and toggle Bluetooth tethering to On.
5. Back on your computer, right-click on the Bluetooth icon and select Join a Personal Area Network. This should open a new menu.
6. Open the Connect Using dropdown menu and select Access Point. You should now be connected to the internet.

That’s all it takes! You should be able to jump through the hoops on any of these three methods in just a few minutes to get yourself onto the internet.

โดยทั่วไปแล้วผู้คนจะผูกแล็ปท็อปกับโทรศัพท์ Android โดยใช้การเชื่อมต่อข้อมูลของโทรศัพท์เพื่อออนไลน์จากที่ใดก็ได้ แต่คุณอาจต้องการ“ ย้อนกลับโยง” แบ่งปันการเชื่อมต่ออินเทอร์เน็ตของพีซีของคุณกับโทรศัพท์หรือแท็บเล็ต Android.

มีหลายวิธีในการทำเช่นนี้ คุณสามารถใช้ฮอตสปอต Wi-Fi, บลูทู ธ – หรือแม้กระทั่งย้อนกลับผ่านทางสาย USB ทั้งหมด มันมีประโยชน์เมื่อคอมพิวเตอร์ของคุณมีการเชื่อมต่ออินเทอร์เน็ต แต่โทรศัพท์ของคุณไม่มี.

สร้างจุดเชื่อมต่อ Wi-Fi

วิธีที่ง่ายที่สุดในที่นี้คือการสร้างฮอตสปอต Wi-Fi นี่เหมือนกับการสร้างฮอตสปอต Wi-Fi บนโทรศัพท์ของคุณเพื่อแชร์การเชื่อมต่อข้อมูลมือถือกับพีซีหรือ Mac ของคุณ แต่คุณจะสร้างฮอตสปอต Wi-Fi บนคอมพิวเตอร์ของคุณและแชร์การเชื่อมต่ออินเทอร์เน็ตกับโทรศัพท์หรือแท็บเล็ต Android ของคุณ.

แน่นอนว่าคุณต้องใช้ฮาร์ดแวร์ Wi-Fi ในการทำเช่นนี้ แล็ปท็อปทั่วไปจะทำงานได้ดี หากคุณต้องการย้อนกลับโยงโทรศัพท์หรือแท็บเล็ต Android ไปยังคอมพิวเตอร์เดสก์ท็อปที่ไม่มี Wi-Fi เพื่อให้คุณสามารถแชร์การเชื่อมต่ออีเธอร์เน็ตแบบใช้สายคุณสามารถซื้ออะแดปเตอร์ USB-to-Wi-Fi ราคาไม่แพงและใช้สำหรับ จุดประสงค์นี้.

โทรศัพท์และแท็บเล็ต Android ไม่รองรับเครือข่ายเฉพาะกิจ แต่ซอฟต์แวร์เราเตอร์เสมือนจริงจะสร้างฮอตสปอต Wi-Fi ที่ทำหน้าที่เป็นจุดเชื่อมต่อทำให้อุปกรณ์ Android สามารถเชื่อมต่อได้ หากคุณกำลังใช้โซลูชันอื่นตรวจสอบให้แน่ใจว่ามันทำหน้าที่เป็นจุดเชื่อมต่อและไม่ใช่เครือข่ายเฉพาะกิจ.

เราขอแนะนำให้ใช้เราเตอร์เสมือนสำหรับการสร้างฮอตสปอต Wi-Fi บนพีซี Windows มันเป็น front-end ที่สะดวกสบายของฮอตสปอต Wi-Fi ที่มีประสิทธิภาพและคุณสมบัติการแบ่งปันการเชื่อมต่ออินเทอร์เน็ตที่มีอยู่ใน Windows คุณสามารถใช้เพื่อแชร์การเชื่อมต่ออีเธอร์เน็ตแบบใช้สายผ่าน Wi-Fi หรือแม้กระทั่งแชร์การเชื่อมต่อ Wi-Fi ที่คุณเชื่อมต่อด้วยการสร้างฮอตสปอต Wi-Fi สิ่งนี้ทำให้สะดวกในสถานการณ์ที่คุณมีล็อกอินเพียงครั้งเดียวสำหรับเครือข่าย Wi-Fi เช่นในโรงแรม.

ผู้ใช้ Mac ในทางทฤษฎีสามารถใช้คุณสมบัติการแบ่งปันอินเทอร์เน็ตที่สร้างขึ้นใน Mac OS X สำหรับสิ่งนี้ แต่นั่นสร้างเครือข่ายเฉพาะกิจอุปกรณ์ Android ไม่สามารถเชื่อมต่อกับ.

บลูทู ธ PAN

คุณสามารถใช้บลูทู ธ สำหรับสิ่งนี้ได้ สมมติว่าโทรศัพท์หรือแท็บเล็ตของคุณใช้ Android 4.0 หรือใหม่กว่าคุณสามารถจับคู่ผ่านบลูทู ธ และใช้บลูทู ธ PAN (เครือข่ายพื้นที่ส่วนบุคคล).

โดยทั่วไปคุณจะต้องสร้างฮอตสปอต Wi-Fi หากคุณใช้ Windows และเชื่อมต่ออินเทอร์เน็ตผ่านทางนั้น Wi-Fi เร็วกว่าและติดตั้งง่ายกว่า อย่างไรก็ตาม Bluetooth PAN มีประโยชน์อย่างยิ่งใน Macs – หากคุณต้องการแบ่งปันการเชื่อมต่อ Wi-Fi ของ Mac กับสมาร์ทโฟนหรือแท็บเล็ต Android คุณจะต้องใช้ Bluetooth PAN หรือรับอแด็ปเตอร์ Wi-Fi ทางกายภาพตัวที่สอง อะแดปเตอร์ USB เป็น Wi-Fi) เนื่องจากคุณต้องการอินเทอร์เฟซเครือข่ายแยกกันสองตัวสำหรับสิ่งนี้.

เปิดใช้งานการแชร์อินเทอร์เน็ตผ่าน Bluetooth บน Mac ของคุณและจับคู่โทรศัพท์ Android กับ Mac ของคุณ แตะอุปกรณ์ที่เชื่อมต่อบนหน้าจอการตั้งค่า Bluetooth ของอุปกรณ์ Android และเปิดใช้งานช่องทำเครื่องหมาย “การเข้าถึงอินเทอร์เน็ต”.

สาย USB – เฉพาะราก

เป็นไปได้ที่จะโยงคอมพิวเตอร์ของคุณกับโทรศัพท์ Android ผ่าน USB เข้าถึงอินเทอร์เน็ตผ่านโทรศัพท์ คุณอาจสงสัยว่าเป็นไปได้หรือไม่ที่จะใช้มือถือหรือแท็บเล็ต Android กับคอมพิวเตอร์ผ่านทาง USB และเข้าถึงอินเทอร์เน็ตผ่านการเชื่อมต่อเครือข่ายของคอมพิวเตอร์.

สิ่งนี้เป็นไปได้ แต่ต้องการการเข้าถึงรูท เราได้ครอบคลุมวิธีการย้อนกลับโยงโทรศัพท์ Android หรือแท็บเล็ตไปยังคอมพิวเตอร์ผ่านสาย USB โดยใช้แอปพลิเคชัน Windows และมีวิธีการอื่นที่คล้ายคลึงกันซึ่งใช้เครื่องมือหรือคำสั่งต่าง ๆ ที่คุณสามารถพิมพ์ได้.

วิธีการใช้สายเคเบิล USB มีประโยชน์มากที่สุดเมื่อคุณอยู่ในสถานที่ที่คุณไม่สามารถใช้การเชื่อมต่อ Wi-Fi หรือบลูทู ธ แบบย้อนกลับได้ด้วยเหตุผลบางประการ เป็นเรื่องที่น่ารังเกียจเนื่องจากข้อกำหนดสำหรับการเข้าถึงรูทและแฮ็กและเครื่องมือเพิ่มเติมที่จำเป็นสำหรับการทำงานนี้ ยิ่งไปกว่านั้นแอพ Android บางตัวยังไม่รู้ว่ามีการเชื่อมต่ออินเทอร์เน็ตหากคุณทำเช่นนี้ หากเป็นไปได้คุณควรตั้งค่าจุดเชื่อมต่อ Wi-Fi หรือใช้ Bluetooth PAN สำหรับการถอยหลังถอยหลัง.

น่าเสียดายที่ไม่มีวิธีการเหล่านี้สำหรับ Chromebook แม้ว่า Google จะพยายามทำให้ Chrome OS และ Android ทำงานร่วมกันได้ดีขึ้น แต่ Chromebook ยังไม่สามารถสร้างฮอตสปอต Wi-Fi หรือ Bluetooth PAN เพื่อแบ่งปันการเชื่อมต่ออินเทอร์เน็ตกับอุปกรณ์อื่น ๆ.

นั่นคือสมมติว่าคุณกำลังใช้งาน Chrome OS อยู่แล้ว – คุณสามารถทำให้ Chromebook ของคุณเข้าสู่โหมดนักพัฒนาซอฟต์แวร์และติดตั้งระบบ Linux เต็มรูปแบบเพื่อเข้าใช้งานเครื่องมือสร้างฮอตสปอต Wi-Fi ที่สร้างในการกระจาย Linux ทั่วไป.